
1 Gang Front Plate – 1 x Neutrik D-Type Cutout Panel – Black – Unloaded
- Front Panel for 1 Gang Pattress Boxes
- Punched for Neutrik D-Series Connectors (XLR, SpeakON, RJ45)
- Black Powder Coated
- Includes M3 fixing screws

1 Gang Front Plate – 2 x Neutrik D-Type Cutout Panel – Black – Unloaded
- Front Panel for 1 Gang Pattress Boxes
- Punched for 2 x Neutrik D-Series Connectors (XLR, SpeakON, RJ45)
- Black Powder Coated
- Includes M3 fixing screws

1 Gang Front Plate – 4 x Neutrik D-Type Cutout Panel – Black – Unloaded
- Front Panel for 1 Gang Pattress Boxes
- Punched for 4 x Neutrik D-Series Connectors (XLR, SpeakON, RJ45)
- Black Powder Coated
- Includes M3 fixing screws

1 Gang Front Plate – 1 x Neutrik D-Type Cutout Panel – White – Unloaded
- Front Panel for 1 Gang Pattress Boxes
- Punched for Neutrik D-Series Connectors (XLR, SpeakON, RJ45)
- White Powder Coated
- Includes M3 fixing screws

1 Gang Front Plate – 2 x Neutrik D-Type Cutout Panel – White – Unloaded
- Front Panel for 1 Gang Pattress Boxes
- Punched for 2 x Neutrik D-Series Connectors (XLR, SpeakON, RJ45)
- White Powder Coated
- Includes M3 fixing screws

2 Gang Front Plate – 2 x Neutrik D-Type Cutout Panel – Black – Unloaded
- Front Panel for 2 Gang Pattress Boxes
- Punched for 2 x Neutrik D-Series Connectors (XLR, SpeakON, RJ45)
- Black Powder Coated
- Includes M3 fixing screws
- Width: 14.5cm / Height: 8.5cm

2 Gang Front Plate – 4 x Neutrik D-Type Cutout Panel – Black – Unloaded
- Front Panel for 2 Gang Pattress Boxes
- Punched for 4 x Neutrik D-Series Connectors (XLR, SpeakON, RJ45)
- Black Powder Coated
- Includes M3 fixing screws
- Width: 14.5cm / Height: 8.5cm

2 Gang Front Plate – 8 x Neutrik D-Type Cutout Panel – Black – Unloaded
- Front Panel for 2 Gang Pattress Boxes
- Punched for 8 x Neutrik D-Series Connectors (XLR, SpeakON, RJ45)
- Black Powder Coated
- Includes M3 fixing screws
- Width: 14.5cm / Height: 8.5cm

Custom Lynx 12 Way Unloaded Box
Custom Lynx Empty 12 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.
These boxes consist of three parts, a rear back box, front plate and side plate which can be removed so a multi-pin can be connected. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors which can be rear mounted. The back box has three cable entry points, one on the right and left side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.
Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.
Approximate Dimensions
Maximum Cable OD: 18mm
Box Dimensions: 32cm x 12cm x 8.5cm
Size for multi-pin entry:
For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

Custom Lynx 16 Way Unloaded Box
Custom Lynx Empty 16 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.
These boxes consist of three parts, a rear back box, front plate and side plate which can be removed so a multi-pin can be connected. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors which can be rear mounted. The back box has three cable entry points, one on the right and left side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.
Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.
Approximate Dimensions
Maximum Cable OD: 18mm
Box Dimensions: 32cm x 12cm x 8.5cm
Size for multi-pin entry:
For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

Custom Lynx 2 Way Unloaded Box
These boxes are made from 18 gauge steel, powder coated in black and numbered in white. It comprises of 2 parts, the base and lid. The base is fitted either with feet or to the wall. The cable can then enter through the side, bottom or rear.
Dimensions (Approximately):
L: 14cm
W: 7cm
H: 3.5mm
The boxes come with 4 rubber feet and screws- 2 blanking plugs for the un-used holes and a cable gland. The maximum cable to fit in the gland is 9mm O.D
The 2 connector holes are standard “D” cut outs suitable for standard or Neutrik quality connectors.

Custom Lynx 8 Way Unloaded Box
Custom Lynx Empty 8 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.
These boxes consist of three parts, a rear back box, front plate and side plate which can be removed so a multi-pin can be connected. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors which can be rear mounted. The back box has three cable entry points, one on the right and left side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.
Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.
Approximate Dimensions
Maximum Cable OD: 18mm
Box Dimensions: 32cm x 12cm x 8.5cm
Size for multi-pin entry:
For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

RUND01 Sommer Front Plate For GT310. Punched For 1 x D-Type Cut-Outs (Neutrik XLR, TRS Jack, EtherCON ETC)
- Sommer – Front panel with 1 x D-Type Holes (XLR, Jack, EtherCON etc)
- Suitable for GT310, HT and SK-Modelle, anthracite RAL7016
- Colour detailed anthracite RAL7016
- Affiliation GT310, HT and SK-Modelle
- EAN 4049371050692

RUND08 Sommer Front Plate For GT310. Punched For 8 x D-Type Cut-Outs (Neutrik XLR, TRS Jack ETC)
- Sommer – Front panel with 8 D-Type Holes (XLR, etc)
- Suitable for GT310, HT and SK-Modelle, anthracite RAL7016
- Colour detailed anthracite RAL7016
- Affiliation GT310, HT and SK-Modelle
- EAN 4049371050739

Schill GT310 Plastic Cable Drum – Cable Reel – Empty/Unloaded
- Schill Drum – German Made
- Cable Drum Made of Speciality Rubber – Very Rugged
- Locking Brake on Rear of Drum
- Available With a Range of Front Plates
- See Below For Max Cable Capacity (With Different O.D’s)
- Click here for Technical Specification

Schill GT380 Plastic Cable Drum – Cable Reel – Empty/Unloaded
- Schill Drum – German Made
- Cable Drum Made of Speciality Rubber – Very Rugged
- Locking Brake on Rear of Drum
- Available With a Range of Front Plates
- See Below For Max Cable Capacity (With Different O.D’s)
- Click Here for Technical Specification