XLR to Jack

Custom Lynx Neutrik Sommer 2 Way Female XLR to TRS Jack Loom

0 out of 5
(0)

2 Way/Channel Custom Lynx ‘Tourgrade’ Professional TRS Jack (6.35mm) to Female XLR Looms. Flexible, noiseless and rugged, these looms are built using Sommer Mistral Professional Cable. 1/4″ Stereo Jacks

Using the best components on the market, the looms come with:

  • Genuine Neutrik Nickel Jack Connectors (NP3X + NC3FXX)
  • Sommer SC-Mistral ‘Tourgrade’ Pre Jacketed Multicore Cable
  • Stereo/Balanced Loom
  • Numbers Under Clear Heatshrink On The Jacks -Clear Rings On The XLR’s
  • Black Plyosil Braid Used To Protect Each Channel, Making For A More Rugged And Professional Loom
  • Free Velcro Strap With Looms Over 2m Long

With the channel numbers being under clear rings/heat shrink it eliminates the marker wearing off over time. All connectors also have hot glue inside the connectors before being assembled to ensure no movement.

These cables are hand built in the UK, rigorously tested before dispatch and carry a 5 Year Guarantee Against Manufacturing Defects.

PLEASE NOTE:

The length of cable is measured from connector to connector, which includes the breakout/tails.

For 50cm length looms we will supply 150mm (15cm) tails on both ends as standard. We can also offer different breakout/tail lengths from the drop down option.

Please specify if you require different breakout/tails length at point of order.

Custom Lynx Neutrik Sommer 2 Way Male XLR to TRS Jack Loom

0 out of 5
(0)

2 Way/Channel Custom Lynx ‘Tourgrade’ Professional TRS Jack (6.35mm) to Male XLR Looms. Flexible, noiseless and rugged, these looms are built using Sommer Mistral Professional Cable. 1/4″ Stereo Jacks

Using the best components on the market, the looms come with:

  • Genuine Neutrik Nickel Jack Connectors (NP3X + NC3MXX)
  • Sommer SC-Mistral ‘Tourgrade’ Pre Jacketed Multicore Cable
  • Stereo/Balanced Loom
  • Numbers Under Clear Heatshrink On The Jacks -Clear Rings On The XLR’s
  • Black Plyosil Braid Used To Protect Each Channel, Making For A More Rugged And Professional Loom
  • Free Velcro Strap With Looms Over 2m Long

With the channel numbers being under clear rings/heat shrink it eliminates the marker wearing off over time. All connectors also have hot glue inside the connectors before being assembled to ensure no movement.

These cables are hand built in the UK, rigorously tested before dispatch and carry a 5 Year Guarantee Against Manufacturing Defects.

PLEASE NOTE:

The length of cable is measured from connector to connector, which includes the breakout/tails.

For 50cm length looms we will supply 150mm (15cm) tails on both ends as standard. We can also offer different breakout/tail lengths from the drop down option.

Please specify if you require different breakout/tails length at point of order.

Custom Lynx Neutrik Sommer 4 Way Female XLR to TRS Jack Loom

0 out of 5
(0)

4 Way/Channel Custom Lynx ‘Tourgrade’ Professional TRS Jack (6.35mm) to Female XLR Looms. Flexible, noiseless and rugged, these looms are built using Sommer Mistral Professional Cable. 1/4″ Stereo Jacks

Using the best components on the market, the looms come with:

  • Genuine Neutrik Nickel Jack Connectors (NP3X + NC3FXX)
  • Sommer SC-Mistral ‘Tourgrade’ Pre Jacketed Multicore Cable
  • Stereo/Balanced Loom
  • Numbers Under Clear Heatshrink On The Jacks -Clear Rings On The XLR’s
  • Black Plyosil Braid Used To Protect Each Channel, Making For A More Rugged And Professional Loom
  • Free Velcro Strap With Looms Over 2m Long

With the channel numbers being under clear rings/heat shrink it eliminates the marker wearing off over time. All connectors also have hot glue inside the connectors before being assembled to ensure no movement.

These cables are hand built in the UK, rigorously tested before dispatch and carry a 5 Year Guarantee Against Manufacturing Defects.

PLEASE NOTE:

The length of cable is measured from connector to connector, which includes the breakout/tails.

For 50cm length looms we will supply 150mm (15cm) tails on both ends as standard. We can also offer different breakout/tail lengths from the drop down option.

Please specify if you require different breakout/tails length at point of order.

Custom Lynx Neutrik Sommer 4 Way Male XLR to TRS Jack Loom

0 out of 5
(0)

4 Way/Channel Custom Lynx ‘Tourgrade’ Professional TRS Jack (6.35mm) to Male XLR Looms. Flexible, noiseless and rugged, these looms are built using Sommer Mistral Professional Cable. 1/4″ Stereo Jacks

Using the best components on the market, the looms come with:

  • Genuine Neutrik Nickel Jack Connectors (NP3X + NC3MXX)
  • Sommer SC-Mistral ‘Tourgrade’ Pre Jacketed Multicore Cable
  • Stereo/Balanced Loom
  • Numbers Under Clear Heatshrink On The Jacks -Clear Rings On The XLR’s
  • Black Plyosil Braid Used To Protect Each Channel, Making For A More Rugged And Professional Loom
  • Free Velcro Strap With Looms Over 2m Long

With the channel numbers being under clear rings/heat shrink it eliminates the marker wearing off over time. All connectors also have hot glue inside the connectors before being assembled to ensure no movement.

These cables are hand built in the UK, rigorously tested before dispatch and carry a 5 Year Guarantee Against Manufacturing Defects.

PLEASE NOTE:

The length of cable is measured from connector to connector, which includes the breakout/tails.

For 50cm length looms we will supply 150mm (15cm) tails on both ends as standard. We can also offer different breakout/tail lengths from the drop down option.

Please specify if you require different breakout/tails length at point of order.

Custom Lynx Neutrik Sommer 8 Way Female XLR to TRS Jack Loom

0 out of 5
(0)

8 Way/Channel Custom Lynx ‘Tourgrade’ Professional TRS Jack (6.35mm) to Female XLR Looms. Flexible, noiseless and rugged, these looms are built using Sommer Mistral Professional Cable. 1/4″ Stereo Jacks

Using the best components on the market, the looms come with:

  • Genuine Neutrik Nickel Jack Connectors (NP3X + NC3FXX)
  • Sommer SC-Mistral ‘Tourgrade’ Pre Jacketed Multicore Cable
  • Stereo/Balanced Loom
  • Numbers Under Clear Heatshrink On The Jacks -Clear Rings On The XLR’s
  • Black Plyosil Braid Used To Protect Each Channel, Making For A More Rugged And Professional Loom
  • Free Velcro Strap With Looms Over 2m Long

With the channel numbers being under clear rings/heat shrink it eliminates the marker wearing off over time. All connectors also have hot glue inside the connectors before being assembled to ensure no movement.

These cables are hand built in the UK, rigorously tested before dispatch and carry a 5 Year Guarantee Against Manufacturing Defects.

PLEASE NOTE:

The length of cable is measured from connector to connector, which includes the breakout/tails.

For 50cm length looms we will supply 150mm (15cm) tails on both ends as standard. We can also offer different breakout/tail lengths from the drop down option.

Please specify if you require different breakout/tails length at point of order.

Custom Lynx Neutrik Sommer 8 Way Male XLR to TRS Jack Loom

0 out of 5
(0)

8 Way/Channel Custom Lynx ‘Tourgrade’ Professional TRS Jack (6.35mm) to Male XLR Looms. Flexible, noiseless and rugged, these looms are built using Sommer Mistral Professional Cable. 1/4″ Stereo Jacks

Using the best components on the market, the looms come with:

  • Genuine Neutrik Nickel Jack Connectors (NP3X + NC3MXX)
  • Sommer SC-Mistral ‘Tourgrade’ Pre Jacketed Multicore Cable
  • Stereo/Balanced Loom
  • Numbers Under Clear Heatshrink On The Jacks -Clear Rings On The XLR’s
  • Black Plyosil Braid Used To Protect Each Channel, Making For A More Rugged And Professional Loom
  • Free Velcro Strap With Looms Over 2m Long

With the channel numbers being under clear rings/heat shrink it eliminates the marker wearing off over time. All connectors also have hot glue inside the connectors before being assembled to ensure no movement.

These cables are hand built in the UK, rigorously tested before dispatch and carry a 5 Year Guarantee Against Manufacturing Defects.

PLEASE NOTE:

The length of cable is measured from connector to connector, which includes the breakout/tails.

For 50cm length looms we will supply 150mm (15cm) tails on both ends as standard. We can also offer different breakout/tail lengths from the drop down option.

Please specify if you require different breakout/tails length at point of order.

Van Damme Neutrik 2 Way TRS Jack to Female XLR Loom

0 out of 5
(0)

Van Damme Studio Quality Wire Looms – 2 Way Neutrik Female XLR to Neutrik Stereo TRS Jack Plug. Flexible, noiseless and rugged, these looms are all a professional musician needs.

Used by the BBC and Studio’s all over the world.

Loom Specification:

  • Van Damme Blue Series Pre Jacketed Multicore Cable
  • Stereo / Balanced Loom.
  • Genuine Neutrik Connectors
  • Clearly Numbered – Under Clear Rings on XLR’s
  • Numbers Under Clear Heatshrink On The Jacks
    Black Plyosil Braid Used To Protect Each Channel, Making For A More Rugged And Professional Loom
  • Each Connector Is Glued Inside To Ensure No Movement
  • These cables are hand built in the UK, rigorously tested before dispatch and carry a 12 Month Guarantee against manufacturing defects

Please note: The length of cable is measured from connector to connector. The breakout/fly length is included in the cable length selected. Available in ANY length – if you require a length not shown, please get in touch.

We can also offer custom labelling on the XLR’s at no extra cost – please leave a note or get in touch

If you require a mix of connectors on each end – no problem, please leave a note or get in touch

Cable Specification:

Van Damme Blue Series

  • Jacket Material PVC composite Sapphire blue
  • Electrical characteristics Resistance Conductor Ohm/Km
  • Insulation M Ohm/Km >5000
  • Capacitance Core to core pF/m 100 nominal Core to shield 200 nominal

Cable O.D:

2 Way:  7.50mm

Connectors:

NC3FXX: Neutrik 3 Pin Female XLR

NP3X: Neutrik 3 pole 1/4″ professional phone plug.

Van Damme Neutrik 2 Way TRS Jack To Male XLR Loom

0 out of 5
(0)

Van Damme Studio Quality Wire Looms – 2 Way Neutrik Male XLR to Neutrik Stereo TRS Jack Plug. Flexible, noiseless and rugged, these looms are all a professional musician needs.

Used by the BBC and Studio’s all over the world.

Loom Specification:

  • Van Damme Blue Series Pre Jacketed Multicore Cable
  • Stereo / Balanced Loom.
  • Genuine Neutrik Connectors
  • Clearly Numbered – Under Clear Rings on XLR’s
  • Numbers Under Clear Heatshrink On The Jacks
    Black Plyosil Braid Used To Protect Each Channel, Making For A More Rugged And Professional Loom
  • Each Connector Is Glued Inside To Ensure No Movement
  • These cables are hand built in the UK, rigorously tested before dispatch and carry a 12 Month Guarantee against manufacturing defects

Please note: The length of cable is measured from connector to connector. The breakout/fly length is included in the cable length selected. Available in ANY length – if you require a length not shown, please get in touch.

We can also offer custom labelling on the XLR’s at no extra cost – please leave a note or get in touch

If you require a mix of connectors on each end – no problem, please leave a note or get in touch

Cable Specification:

Van Damme Blue Series

  • Jacket Material PVC composite Sapphire blue
  • Electrical characteristics Resistance Conductor Ohm/Km
  • Insulation M Ohm/Km >5000
  • Capacitance Core to core pF/m 100 nominal Core to shield 200 nominal

Cable O.D:

2 Way:  7.50mm

Connectors:

NC3MXX: Neutrik 3 Pin Male XLR

NP3X: Neutrik 3 pole 1/4″ professional phone plug.

Van Damme Neutrik 4 Way TRS Jack to Female XLR Loom

0 out of 5
(0)

Van Damme Studio Quality Wire Looms – 4 Way Neutrik Female XLR to Neutrik Stereo TRS Jack Plug. Flexible, noiseless and rugged, these looms are all a professional musician needs.

Used by the BBC and Studio’s all over the world.

Loom Specification:

  • Van Damme Blue Series Pre Jacketed Multicore Cable
  • Stereo / Balanced Loom.
  • Genuine Neutrik Connectors
  • Clearly Numbered – Under Clear Rings on XLR’s
  • Numbers Under Clear Heatshrink On The Jacks
    Black Plyosil Braid Used To Protect Each Channel, Making For A More Rugged And Professional Loom
  • Each Connector Is Glued Inside To Ensure No Movement
  • These cables are hand built in the UK, rigorously tested before dispatch and carry a 12 Month Guarantee against manufacturing defects

Please note: The length of cable is measured from connector to connector. The breakout/fly length is included in the cable length selected. Available in ANY length – if you require a length not shown, please get in touch.

We can also offer custom labelling on the XLR’s at no extra cost – please leave a note or get in touch

If you require a mix of connectors on each end – no problem, please leave a note or get in touch

Cable Specification:

Van Damme Blue Series

  • Jacket Material PVC composite Sapphire blue
  • Electrical characteristics Resistance Conductor Ohm/Km
  • Insulation M Ohm/Km >5000
  • Capacitance Core to core pF/m 100 nominal Core to shield 200 nominal

Cable O.D:

4 Way:  9.60mm

Connectors:

NC3FXX: Neutrik 3 Pin Female XLR

NP3X: Neutrik 3 pole 1/4″ professional phone plug.

Van Damme Neutrik 4 Way TRS Jack To Male XLR Loom

0 out of 5
(0)

Van Damme Studio Quality Wire Looms – 4 Way Neutrik Male XLR to Neutrik Stereo TRS Jack Plug. Flexible, noiseless and rugged, these looms are all a professional musician needs.

Used by the BBC and Studio’s all over the world.

Loom Specification:

  • Van Damme Blue Series Pre Jacketed Multicore Cable
  • Stereo / Balanced Loom.
  • Genuine Neutrik Connectors
  • Clearly Numbered – Under Clear Rings on XLR’s
  • Numbers Under Clear Heatshrink On The Jacks
    Black Plyosil Braid Used To Protect Each Channel, Making For A More Rugged And Professional Loom
  • Each Connector Is Glued Inside To Ensure No Movement
  • These cables are hand built in the UK, rigorously tested before dispatch and carry a 12 Month Guarantee against manufacturing defects

Please note: The length of cable is measured from connector to connector. The breakout/fly length is included in the cable length selected. Available in ANY length – if you require a length not shown, please get in touch.

We can also offer custom labelling on the XLR’s at no extra cost – please leave a note or get in touch

If you require a mix of connectors on each end – no problem, please leave a note or get in touch

Cable Specification:

Van Damme Blue Series

  • Jacket Material PVC composite Sapphire blue
  • Electrical characteristics Resistance Conductor Ohm/Km
  • Insulation M Ohm/Km >5000
  • Capacitance Core to core pF/m 100 nominal Core to shield 200 nominal

Cable O.D:

4 Way:  9.60mm

Connectors:

NC3MXX: Neutrik 3 Pin Male XLR

NP3X: Neutrik 3 pole 1/4″ professional phone plug.

Van Damme Neutrik 8 Way TRS Jack to Female XLR Loom

0 out of 5
(0)

Van Damme Studio Quality Wire Looms – 8 Way Neutrik Female XLR to Neutrik Stereo TRS Jack Plug. Flexible, noiseless and rugged, these looms are all a professional musician needs.

Used by the BBC and Studio’s all over the world.

Loom Specification:

  • Van Damme Blue Series Pre Jacketed Multicore Cable
  • Stereo / Balanced Loom.
  • Genuine Neutrik Connectors
  • Clearly Numbered – Under Clear Rings on XLR’s
  • Numbers Under Clear Heatshrink On The Jacks
    Black Plyosil Braid Used To Protect Each Channel, Making For A More Rugged And Professional Loom
  • Each Connector Is Glued Inside To Ensure No Movement
  • These cables are hand built in the UK, rigorously tested before dispatch and carry a 12 Month Guarantee against manufacturing defects

Please note: The length of cable is measured from connector to connector. The breakout/fly length is included in the cable length selected. Available in ANY length – if you require a length not shown, please get in touch.

We can also offer custom labelling on the XLR’s at no extra cost – please leave a note or get in touch

If you require a mix of connectors on each end – no problem, please leave a note or get in touch

Cable Specification:

Van Damme Blue Series

  • Jacket Material PVC composite Sapphire blue
  • Electrical characteristics Resistance Conductor Ohm/Km
  • Insulation M Ohm/Km >5000
  • Capacitance Core to core pF/m 100 nominal Core to shield 200 nominal

Cable O.D:

8 Way:  12.20mm

Connectors:

NC3FXX: Neutrik 3 Pin Female XLR

NP3X: Neutrik 3 pole 1/4″ professional phone plug.

Van Damme Neutrik 8 Way TRS Jack To Male XLR Loom

0 out of 5
(0)

Van Damme Studio Quality Wire Looms – 8 Way Neutrik Male XLR to Neutrik Stereo TRS Jack Plug. Flexible, noiseless and rugged, these looms are all a professional musician needs.

Used by the BBC and Studio’s all over the world.

Loom Specification:

  • Van Damme Blue Series Pre Jacketed Multicore Cable
  • Stereo / Balanced Loom.
  • Genuine Neutrik Connectors
  • Clearly Numbered – Under Clear Rings on XLR’s
  • Numbers Under Clear Heatshrink On The Jacks
    Black Plyosil Braid Used To Protect Each Channel, Making For A More Rugged And Professional Loom
  • Each Connector Is Glued Inside To Ensure No Movement
  • These cables are hand built in the UK, rigorously tested before dispatch and carry a 12 Month Guarantee against manufacturing defects

Please note: The length of cable is measured from connector to connector. The breakout/fly length is included in the cable length selected. Available in ANY length – if you require a length not shown, please get in touch.

We can also offer custom labelling on the XLR’s at no extra cost – please leave a note or get in touch

If you require a mix of connectors on each end – no problem, please leave a note or get in touch

Cable Specification:

Van Damme Blue Series

  • Jacket Material PVC composite Sapphire blue
  • Electrical characteristics Resistance Conductor Ohm/Km
  • Insulation M Ohm/Km >5000
  • Capacitance Core to core pF/m 100 nominal Core to shield 200 nominal

Cable O.D:

8 Way:  12.20mm

Connectors:

NC3MXX: Neutrik 3 Pin Male XLR

NP3X: Neutrik 3 pole 1/4″ professional phone plug.

Showing all 12 results