No products in the basket.
Custom Lynx 12 Way Unloaded Box
Custom Lynx Empty 12 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.
These boxes consist of three parts, a rear back box, front plate and side plate which can be removed so a multi-pin can be connected. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors which can be rear mounted. The back box has three cable entry points, one on the right and left side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.
Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.
Approximate Dimensions
Maximum Cable OD: 18mm
Box Dimensions: 32cm x 12cm x 8.5cm
Size for multi-pin entry:
For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.
£29.35 (inc. VAT) Add to basket
Custom Lynx 16 Way Unloaded Box
Custom Lynx Empty 16 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.
These boxes consist of three parts, a rear back box, front plate and side plate which can be removed so a multi-pin can be connected. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors which can be rear mounted. The back box has three cable entry points, one on the right and left side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.
Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.
Approximate Dimensions
Maximum Cable OD: 18mm
Box Dimensions: 32cm x 12cm x 8.5cm
Size for multi-pin entry:
For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.
£30.85 (inc. VAT) Add to basket
Custom Lynx 2 Way Unloaded Box
These boxes are made from 18 gauge steel, powder coated in black and numbered in white. It comprises of 2 parts, the base and lid. The base is fitted either with feet or to the wall. The cable can then enter through the side, bottom or rear.
Dimensions (Approximately):
L: 14cm
W: 7cm
H: 3.5mm
The boxes come with 4 rubber feet and screws- 2 blanking plugs for the un-used holes and a cable gland. The maximum cable to fit in the gland is 9mm O.D
The 2 connector holes are standard “D” cut outs suitable for standard or Neutrik quality connectors.
£9.50 (inc. VAT) Add to basket
Custom Lynx 20 Way Unloaded Box
Custom Lynx Empty 20 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.
These boxes consist of two parts, a rear back box and front plate. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors. The back box has two cable entry points, one on the side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.
Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.
Approximate Dimensions
Maximum Cable OD: 25mm
Box Dimensions: 28cm x 18cm x 6cm
For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.
£37.50 (inc. VAT) Add to basket
Custom Lynx 24 Way Unloaded Box
Custom Lynx Empty 24 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.
These boxes consist of two parts, a rear back box and front plate. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors. The back box has two cable entry points, one on the side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.
Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.
Approximate Dimensions
Maximum Cable OD: 25mm
Box Dimensions: 28cm x 18cm x 6cm
For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.
£39.50 (inc. VAT) Add to basket
Custom Lynx 28 Way Unloaded Box
Custom Lynx Empty 28 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.
These boxes consist of two parts, a rear back box and front plate. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors. The back box has two cable entry points, one on the side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.
Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.
Approximate Dimensions
Maximum Cable OD: 25mm
Box Dimensions: 28cm x 18cm x 6cm
For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.
£41.50 (inc. VAT) Add to basket
Custom Lynx 32 Way Unloaded Box
Custom Lynx Empty 32 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.
These boxes consist of two parts, a rear back box and front plate. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors. The back box has two cable entry points, one on the side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.
Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.
Approximate Dimensions
Maximum Cable OD: 25mm
Box Dimensions: 28cm x 18cm x 6cm
For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.
£43.50 (inc. VAT) Add to basket
Custom Lynx 4 Way Unloaded Box
These 4 way boxes are made from 18 gauge steel, powder coated in black and numbered in white. It comprises of 2 parts, the base and lid. The base is fitted either with feet or to the wall. The cable can then enter through the side, bottom or rear.
Dimensions (Approximately):
L: 14cm
W: 7cm
H: 3.5mm
The boxes come with 4 rubber feet and screws- 2 blanking plugs for the un-used holes and a cable gland. The maximum cable to fit in the gland is 9mm O.D
The 4 connector holes are standard “D” cut outs suitable for standard or Neutrik quality connectors.
£11.50 (inc. VAT) Add to basket
Custom Lynx 8 Way Unloaded Box
Custom Lynx Empty 8 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.
These boxes consist of three parts, a rear back box, front plate and side plate which can be removed so a multi-pin can be connected. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors which can be rear mounted. The back box has three cable entry points, one on the right and left side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.
Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.
Approximate Dimensions
Maximum Cable OD: 18mm
Box Dimensions: 32cm x 12cm x 8.5cm
Size for multi-pin entry:
For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.
£27.95 (inc. VAT) Add to basket
Custom Lynx DB25 To Stage/Wall Box. DSUB To Neutrik Multicore, 8 x Female XLR Chassis Sockets
- DB25/DSUB to 8 x Stage/Wall Box (Loaded With 8 x Female XLR Chassis Sockets)
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik Connectors and Diecast DB25 Shell
- Analogue Use – Standard Tascam Wiring
- Steel Box Can Be Free Standing Or Wall Mounted (Free Standing As Standard)
- Box Is Clearly Numbered 1 To 8
- Any Length Available
- Connectors On The Box Can Be XLR / JACK / RCA / MIDI / 3.5mm JACK – Get In Touch If Required
Custom Lynx DB25 To Stage/Wall Box. DSUB To Neutrik Multicore, 8 x TRS Jack Socket – 6.35mm (1/4″)
- DB25/DSUB to 8 x Stage/Wall Box (Loaded With 8 x 6.35mm Locking TRS Jack Sockets)
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik Connectors and Diecast DB25 Shell
- Analogue Use – Standard Tascam Wiring
- Steel Box Can Be Free Standing Or Wall Mounted (Free Standing As Standard)
- Box Is Clearly Numbered 1 To 8
- Any Length Available
- Connectors On The Box Can Be XLR / JACK / RCA / MIDI / 3.5mm JACK – Get In Touch If Required
Custom Lynx Neutrik 12 Channel Wall/Stage Multicore Box to Box System
- Boxes can be free standing or wall mounted. With different cable entry options on the boxes
- Perfect for Studios
- Both boxes can be hard wired, or just one box wired on and the cable prepared (so it can be pulled through an existing wall and terminated “on site”)
- We can also offer the following connectors; 5 Pin MIDI, RCA Phono and 3.5mm Jack plugs. If required please enter this in the “custom” field boxes.
- Genuine Neutrik Connectors
- Any cable length available
Custom Lynx Neutrik 12 Way Multicore Stage/Wall Box System
Manufactured using professional quality components, each system individually hand assembled in the UK.
The Multicore stage box itself can be free standing or wall mounted, which makes it perfect for either ‘on road’ or studio use.
We can also offer the following connectors; 5 Pin MIDI, RCA Phono and 3.5mm Jack plugs. If required please enter this in the custom field boxes.
The multi paired balanced oxygen free cable is black and highly flexible. On all of the fly/mixer ends we use Plyosil Braid, this strengthens this part of the system dramatically.
Each channel is clearly numbered on both the box and fly end. XLR’s are numbered under a clear ring on the body of the connector itself, numbering on any jacks is placed on the Plyosil just behind the connector.
Cable entry on the box is flexible, we can offer right, left, or straight out of the back to go through a wall.
The box itself is made from 18 gauge powder coated steel. Connectors on the box come with clear numbering above. All connectors used are genuine Neutrik.
All the box systems are made by us here in the UK and are fully tested before dispatch.
A 12 month guarantee is given on all Custom Lynx Multicore Systems.
Custom Lynx Neutrik 16 Channel Wall/Stage Multicore Box to Box System
- Boxes can be free standing or wall mounted. With different cable entry options on the boxes
- Perfect for Studios
- Both boxes can be hard wired, or just one box wired on and the cable prepared (so it can be pulled through an existing wall and terminated “on site”)
- We can also offer the following connectors; 5 Pin MIDI, RCA Phono and 3.5mm Jack plugs. If required please enter this in the “custom” field boxes.
- Genuine Neutrik Connectors
- Any cable length available
Custom Lynx Neutrik 16 Way Multicore Stage/Wall Box System
Manufactured using professional quality components, each system individually hand assembled in the UK.
The Multicore stage box itself can be free standing or wall mounted, which makes it perfect for either ‘on road’ or studio use.
We can also offer the following connectors; 5 Pin MIDI, RCA Phono and 3.5mm Jack plugs. If required please enter this in the custom field boxes.
The multi paired balanced oxygen free cable is black and highly flexible. On all of the fly/mixer ends we use Plyosil Braid, this strengthens this part of the system dramatically.
Each channel is clearly numbered on both the box and fly end. XLR’s are numbered under a clear ring on the body of the connector itself, numbering on any jacks is placed on the Plyosil just behind the connector.
Cable entry on the box is flexible, we can offer right, left, or straight out of the back to go through a wall.
The box itself is made from 18 gauge powder coated steel. Connectors on the box come with clear numbering above. All connectors used are genuine Neutrik.
All the box systems are made by us here in the UK and are fully tested before dispatch.
A 12 month guarantee is given on all Custom Lynx Multicore Systems.
Custom Lynx Neutrik 2 Channel Wall/Stage Multicore Box to Box System
- Boxes can be free standing or wall mounted. With different cable entry options on the boxes
- Perfect for Studios
- Both boxes can be hard wired, or just one box wired on and the cable prepared (so it can be pulled through an existing wall and terminated “on site”)
- We can also offer the following connectors; 5 Pin MIDI, RCA Phono and 3.5mm Jack plugs. If required please enter this in the “custom” field boxes.
- Genuine Neutrik Connectors
- Any cable length available
Custom Lynx Neutrik 2 Channel Wall/Stage Multicore Box to Box System – Sommer Cable
- Boxes can be free standing or wall mounted. With different cable entry options on the boxes
- Perfect for Studios
- Both boxes can be hard wired, or just one box wired on and the cable prepared (so it can be pulled through an existing wall and terminated “on site”)
- We can also offer the following connectors; 5 Pin MIDI, RCA Phono and 3.5mm Jack plugs. If required please enter this in the “custom” field boxes.
- Genuine Neutrik Connectors
- Any cable length available
Custom Lynx Neutrik 2 Way Multicore Stage/Wall Box System – Sommer Cable
Manufactured using professional quality components, each system individually hand assembled in the UK.
The Multicore stage box itself can be free standing or wall mounted, which makes it perfect for either ‘on road’ or studio use.
We can also offer the following connectors; 5 Pin MIDI, RCA Phono and 3.5mm Jack plugs. If required please enter this in the custom field boxes.
The multi paired balanced oxygen free cable is black Sommer Mistral. On all of the fly/mixer ends we use Plyosil Braid, this strengthens this part of the system dramatically.
Each channel is clearly numbered on both the box and fly end. XLR’s are numbered under a clear ring on the body of the connector itself, numbering on any jacks is placed on the Plyosil just behind the connector.
Cable entry on the box is flexible, we can offer right, left, or straight out of the back to go through a wall.
The box itself is made from 18 gauge powder coated steel. Connectors on the box come with clear numbering above. All connectors used are genuine Neutrik.
All the box systems are made by us here in the UK and are fully tested before dispatch.
A 12 month guarantee is given on all Custom Lynx Multicore Systems.
Custom Lynx Neutrik 20 Channel Wall/Stage Multicore Box to Box System
- Boxes can be free standing or wall mounted. With different cable entry options on the boxes
- Perfect for Studios
- Both boxes can be hard wired, or just one box wired on and the cable prepared (so it can be pulled through an existing wall and terminated “on site”)
- We can also offer the following connectors; 5 Pin MIDI, RCA Phono and 3.5mm Jack plugs. If required please enter this in the “custom” field boxes.
- Genuine Neutrik Connectors
- Any cable length available
Custom Lynx Neutrik 20 Way Multicore Stage/Wall Box System
Manufactured using professional quality components, each system individually hand assembled in the UK.
The Multicore stage box itself can be free standing or wall mounted, which makes it perfect for either ‘on road’ or studio use.
We can also offer the following connectors; 5 Pin MIDI, RCA Phono and 3.5mm Jack plugs. If required please enter this in the custom field boxes.
The multi paired balanced oxygen free cable is black and highly flexible. On all of the fly/mixer ends we use Plyosil Braid, this strengthens this part of the system dramatically.
Each channel is clearly numbered on both the box and fly end. XLR’s are numbered under a clear ring on the body of the connector itself, numbering on any jacks is placed on the Plyosil just behind the connector.
Cable entry on the box is flexible, we can offer right, left, or straight out of the back to go through a wall.
The box itself is made from 18 gauge powder coated steel. Connectors on the box come with clear numbering above. All connectors used are genuine Neutrik.
All the box systems are made by us here in the UK and are fully tested before dispatch.
A 12 month guarantee is given on all Custom Lynx Multicore Systems.