Stage Boxes

12 Way/Channel Breakout Box With Multipin. Stage Box. 12 x Neutrik Female XLR. VDM 37 Circular Multipin

  • Custom Lynx Tourgrade Loaded And Wired 12 Way Breakout Box
  • Powder Coated Black Steel Box
  • 12 x Neutrik Female XLR
  • 1 x VDM 37 Pin Male Circular Multipin In The Side (Can Be Left or Right Side)
  • Box Will Come With 4 x Rubber Feet Screwed To The Base
  • Perfect For Tour/Theatre/OB – Anywhere Where Quick Setup And Breakdown Is Essential
  • Wired to Industry Standard Pinouts – Custom Wiring Available Please Get In Touch
  • Box Dimensions: 32cm x 12cm x 8.5cm
£184.04 (inc. VAT) Add to basket

16 Way/Channel Breakout Box With Multipin. Stage Box. 16 x Neutrik Female XLR. VDM 54 Circular Multipin

  • Custom Lynx Tourgrade Loaded And Wired 16 Way Breakout Box
  • Powder Coated Black Steel Box
  • 16 x Neutrik Female XLR
  • 1 x VDM 54 Pin Male Circular Multipin In The Side (Can Be Left or Right Side)
  • Box Will Come With 4 x Rubber Feet Screwed To The Base
  • Perfect For Tour/Theatre/OB – Anywhere Where Quick Setup And Breakdown Is Essential
  • Wired to Industry Standard Pinouts – Custom Wiring Available Please Get In Touch
  • Box Dimensions: 32cm x 12cm x 8.5cm
£241.74 (inc. VAT) Add to basket

8 Way/Channel Breakout Box With Multipin. Stage Box. 8 x Neutrik Female XLR. VDM 25 Circular Multipin

    • Custom Lynx Tourgrade Loaded And Wired 8 Way Breakout Box
    • Powder Coated Black Steel Box
    • 8 x Neutrik Female XLR
    • 1 x VDM 25 Pin Male Circular Multipin In The Side (Can Be Left or Right Side)
    • Box Will Come With 4 x Rubber Feet Screwed To The Base
    • Perfect For Tour/Theatre/OB – Anywhere Where Quick Setup And Breakdown Is Essential
    • Wired to Industry Standard Pinouts – Custom Wiring Available Please Get In Touch
    • Box Dimensions: 32cm x 12cm x 8.5cm
£138.11 (inc. VAT) Add to basket

Custom Lynx 12 Way Loaded Stage Box – Neutrik – 10 x Female XLR, 2 x Male XLR

  • Custom Lynx 12 Way Stage / Wall Boxes
  • Loaded with Genuine Neutrik Connectors – 10 x Female XLR / 2 x Male XLR
  • Side Gland Panel Can Be Removed And A VEAM Multi Pin (37 Pin) Loaded In
  • Left, Right or Rear Cable Entry Available
  • Includes Rubber Feet, Gland, Screws And Blanking Plug
£114.05 (inc. VAT) Add to basket

Custom Lynx 12 Way Unloaded Box

Custom Lynx Empty 12 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.

These boxes consist of three parts, a rear back box, front plate and side plate which can be removed so a multi-pin can be connected. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors which can be rear mounted. The back box has three cable entry points, one on the right and left side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.

Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.

Approximate Dimensions

Maximum Cable OD: 18mm

Box Dimensions: 32cm x 12cm x 8.5cm

Size for multi-pin entry:

For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

£29.35 (inc. VAT) Add to basket

Custom Lynx 16 Way Loaded Stage Box – Neutrik – 12 x Female XLR, 4 x Locking Jack Socket

  • Custom Lynx 16 Way Stage / Wall Boxes
  • Loaded with Genuine Neutrik Connectors – 12 x Female XLR / 4 x Locking Jack (1/4″)
  • Side Gland Panel Can Be Removed And A VEAM Multi Pin (54 Pin) Loaded In
  • Left, Right or Rear Cable Entry Available
  • Includes Rubber Feet, Gland, Screws And Blanking Plug.
£128.07 (inc. VAT) Add to basket

Custom Lynx 16 Way Loaded Stage Box – Neutrik – 16 x Locking Stereo Jack Sockets (6.35mm – 1/4″)

  • Custom Lynx 16 Way Stage / Wall Boxes
  • Loaded with Genuine Neutrik Connectors – 16 x Locking Jack Sockets (6.35mm – 1/4″)
  • Jacks Can Be Wired Stereo Or Mono
  • Side Gland Panel Can Be Removed And A VEAM Multi Pin (54 Pin) Loaded In
  • Left, Right or Rear Cable Entry Available
  • Includes Rubber Feet, Gland, Screws And Blanking Plug.
£138.20 (inc. VAT) Add to basket

Custom Lynx 16 Way Unloaded Box

Custom Lynx Empty 16 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.

These boxes consist of three parts, a rear back box, front plate and side plate which can be removed so a multi-pin can be connected. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors which can be rear mounted. The back box has three cable entry points, one on the right and left side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.

Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.

Approximate Dimensions

Maximum Cable OD: 18mm

Box Dimensions: 32cm x 12cm x 8.5cm

Size for multi-pin entry:

For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

£30.85 (inc. VAT) Add to basket

Custom Lynx 2 Way Unloaded Box

These boxes are made from 18 gauge steel, powder coated in black and numbered in white. It comprises of 2 parts, the base and lid. The base is fitted either with feet or to the wall. The cable can then enter through the side, bottom or rear.

Dimensions (Approximately):

L: 14cm

W: 7cm

H: 3.5mm

The boxes come with 4 rubber feet and screws- 2 blanking plugs for the un-used holes and a cable gland. The maximum cable to fit in the gland is 9mm O.D

The 2 connector holes are standard “D” cut outs suitable for standard or Neutrik quality connectors.

£9.50 (inc. VAT) Add to basket

Custom Lynx 32 Way Loaded Stage Box – Neutrik – 24 x Female XLR Socket & 8 x Male XLR Socket

  • Custom Lynx 32 Way Stage / Wall Box
  • Loaded with Genuine Neutrik Connectors – 24 x NC3FD-L-1 & 8 x NC3MD-L-1
  • Maximum Cable OD: 25mm
  • Left, Right or Rear Cable Entry Available
  • Box Dimensions: 28cm x 18cm x 6cm
  • Includes Rubber Feet, Gland, Screws And Blanking Plug.
£159.48 (inc. VAT) Add to basket

Custom Lynx 8 Way Loaded Stage Box – Neutrik – 6 x Female XLR, 2 x Locking Jack Socket

  • Custom Lynx 8 Way Stage / Wall Boxes
  • Loaded with Genuine Neutrik Connectors – 6 x Female XLR / 2 x Locking Jack (1/4″)
  • Side Gland Panel Can Be Removed And A VEAM Multi Pin (25 Pin) Loaded In
  • Left, Right or Rear Cable Entry Available
  • Includes Rubber Feet, Gland, Screws And Blanking Plug.
£89.77 (inc. VAT) Add to basket

Custom Lynx 8 Way Loaded Stage Box – Neutrik – 6 x Female XLR, 2 x Male XLR

  • Custom Lynx 8 Way Stage / Wall Boxes
  • Loaded with Genuine Neutrik Connectors – 6 x Female XLR / 2 x Male XLR
  • Side Gland Panel Can Be Removed And A VEAM Multi Pin (25 Pin) Loaded In
  • Left, Right or Rear Cable Entry Available
  • Includes Rubber Feet, Gland, Screws And Blanking Plug.
£86.99 (inc. VAT) Add to basket

Custom Lynx 8 Way Loaded Stage Box – Neutrik – 8 x Combi 6.32mm (1/4″) Jack/XLR Sockets (NCJ6FI-S)

  • Custom Lynx 8 Way Stage / Wall Boxes
  • Loaded with Genuine Neutrik Connectors – 8 x Combi 6.32mm (1/4″) Jack/XLR Sockets
  • Side Gland Panel Can Be Removed And A VEAM Multi Pin (25 Pin) Loaded In
  • Left, Right or Rear Cable Entry Available
  • Includes Rubber Feet, Gland, Screws And Blanking Plug.
£73.58 (inc. VAT) Add to basket

Custom Lynx 8 Way Unloaded Box

Custom Lynx Empty 8 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.

These boxes consist of three parts, a rear back box, front plate and side plate which can be removed so a multi-pin can be connected. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors which can be rear mounted. The back box has three cable entry points, one on the right and left side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.

Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.

Approximate Dimensions

Maximum Cable OD: 18mm

Box Dimensions: 32cm x 12cm x 8.5cm

Size for multi-pin entry:

For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

£27.95 (inc. VAT) Add to basket

Showing all 14 results