Unloaded Stage Boxes

Custom Lynx 12 Way Unloaded Box

0 out of 5
(0)

Custom Lynx Empty 12 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.

These boxes consist of two parts, a rear back box and front plate. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors. The back box has two cable entry points, one on the side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.

Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.

Approximate Dimensions

Maximum Cable OD: 18mm

Box Dimensions: 28cm x 12cm x 6cm

For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

£29.50 (inc. VAT) Add to basket

Custom Lynx 2 Way Unloaded Box

0 out of 5
(0)

These boxes are made from 18 gauge steel, powder coated in black and numbered in white. It comprises of 2 parts, the base and lid. The base is fitted either with feet or to the wall. The cable can then enter through the side, bottom or rear.

Dimensions (Approximately):

L: 14cm

W: 7cm

H: 3.5mm

The boxes come with 4 rubber feet and screws- 2 blanking plugs for the un-used holes and a cable gland. The maximum cable to fit in the gland is 9mm O.D

The 2 connector holes are standard “D” cut outs suitable for standard or Neutrik quality connectors.

£9.50 (inc. VAT) Add to basket

Custom Lynx 20 Way Unloaded Box

0 out of 5
(0)

Custom Lynx Empty 20 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.

These boxes consist of two parts, a rear back box and front plate. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors. The back box has two cable entry points, one on the side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.

Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.

Approximate Dimensions

Maximum Cable OD: 25mm

Box Dimensions: 28cm x 18cm x 6cm

For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

£37.50 (inc. VAT) Add to basket

Custom Lynx 24 Way Unloaded Box

0 out of 5
(0)

Custom Lynx Empty 24 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.

These boxes consist of two parts, a rear back box and front plate. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors. The back box has two cable entry points, one on the side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.

Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.

Approximate Dimensions

Maximum Cable OD: 25mm

Box Dimensions: 28cm x 18cm x 6cm

For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

£39.50 (inc. VAT) Add to basket

Custom Lynx 28 Way Unloaded Box

0 out of 5
(0)

Custom Lynx Empty 28 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.

These boxes consist of two parts, a rear back box and front plate. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors. The back box has two cable entry points, one on the side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.

Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.

Approximate Dimensions

Maximum Cable OD: 25mm

Box Dimensions: 28cm x 18cm x 6cm

For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

£41.50 (inc. VAT) Add to basket

Custom Lynx 32 Way Unloaded Box

0 out of 5
(0)

Custom Lynx Empty 32 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.

These boxes consist of two parts, a rear back box and front plate. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors. The back box has two cable entry points, one on the side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.

Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.

Approximate Dimensions

Maximum Cable OD: 25mm

Box Dimensions: 28cm x 18cm x 6cm

For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

£43.50 (inc. VAT) Add to basket

Custom Lynx 4 Way Unloaded Box

0 out of 5
(0)

These 4 way boxes are made from 18 gauge steel, powder coated in black and numbered in white. It comprises of 2 parts, the base and lid. The base is fitted either with feet or to the wall. The cable can then enter through the side, bottom or rear.

Dimensions (Approximately):

L: 14cm

W: 7cm

H: 3.5mm

The boxes come with 4 rubber feet and screws- 2 blanking plugs for the un-used holes and a cable gland. The maximum cable to fit in the gland is 9mm O.D

The 4 connector holes are standard “D” cut outs suitable for standard or Neutrik quality connectors.

£11.50 (inc. VAT) Add to basket

Custom Lynx 8 Way Unloaded Box

0 out of 5
(0)

Custom Lynx Empty 8 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.

These boxes consist of two parts, a rear back box and front plate. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors. The back box has two cable entry points, one on the side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.

Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.

Approximate Dimensions

Maximum Cable OD: 18mm

Box Dimensions: 28cm x 12cm x 6cm

For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

£27.50 (inc. VAT) Add to basket

Showing all 8 results