1u

1U Custom Rack Panel – Loaded With 1 x PowerCON IN – Wired To A Single Trailing Socket (300mm)

  • 1U Rack Panel – 19″
  • Loaded With 1 x Genuine Neutrik PowerCON IN Chassis Socket
  • 1 x 300mm Cable Hard Wired Terminating In A Single Trailing Socket
  • Titanex H07RN-F 3×1.5mm Cable
  • Steel Black Panel
£44.30 (inc. VAT) Add to basket

1U Custom Rack Panel – Loaded With 16 x Neutrik Female XLR – Wired To 2 x D-SUB/DB25

  • Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
  • 1U Rack Panel – 19″- Loaded With 16 x Genuine Neutrik Female XLR Sockets
  • 2 x 25 Pin D-SUB/DB25 Male (Die Cast Shell) Hard Wired To The XLR’s
  • D-SUB/DB25 Shells Will Be Labelled “CH1 to 8” “CH9 to 16”
  • Analogue Audio Cable – D-SUB Wired Tascam Standard
  • Any Length Available
  • Steel Black Panel

1U Custom Rack Panel – Loaded With 8 x EtherCON Panel Mount – Wired To 8 x RJ45 (300mm) – CAT5E

  • 1U Rack Panel – 19″
  • Loaded With 8 x Genuine Neutrik EtherCON Chassis Sockets
  • 8 x 300mm Cables Hard Wired Terminating In Shielded RJ45 Plugs (With Rubber Boots)
  • Steel Black Panel
£144.20 (inc. VAT) Add to basket

1U Custom Rack Panel – Loaded With 8 x Male XLR & 1 x PowerCon – Wired To 8 x Female XLR & 1 x PowerCON (500mm)

  • 1U Rack Panel – 19″
  • Loaded With 8 x Neutrik Male XLR & 1 x PowerCON Chassis Socket
  • 9 x 500mm Cables Hard Wired – 8 x Neutrik Female XLR & 1 x PowerCON Plug
  • Steel Black Panel
£144.20 (inc. VAT) Add to basket

1U Custom Rack Panel – Loaded With 8 x Neutrik Female XLR – Wired To 1 x D-SUB/DB25

  • Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
  • 1U Rack Panel – 19″- Loaded With 8 x Genuine Neutrik Female XLR Sockets
  • 1 x 25 Pin D-SUB/DB25 Male (Die Cast Shell) Hard Wired To The XLR’s
  • Analogue Audio Cable – D-SUB Wired Tascam Standard
  • Any Length Available
  • Steel Black Panel

Blank Rack Panels – 1.5mm, 1/16″ Steel Rack Panels -1U

  • 1U Blank Rack Panel
  • Black Powder Coated Steel
  • Material: 1.5mm / 18 Gauge Steel
£3.48 (inc. VAT) Add to basket

Custom Lynx Neutrik Loaded Rack Panel – 16 x Female XLR – IDC “Push Down” Terminals

  • 1U Rack Panel
  • 16 x Neutrik Female XLR
  • IDC “Push Down” Terminals
  • Identification Strip Above
£42.00 £60.00 (inc. VAT) Add to basket

NYS-SPP-L1 – 1/4” Jack Patch Panel

The NYS-SPP-L1 is a economical and remarkable sleek designed 1/4“ modular Patch Panel for 19“ rack mount (19“ x 1U) with a reinforced metal housing. Each of it‘s 48 PCB wired balanced channels (24 front pairs and corresponding 24 rear pairs) can either be grounded separately or in groups of individually chooseable channel numbers.
The PCBs are held securely in place by being clamped between the front and the rear panel, this grants an easy reconfiguration of the Patch Panel without the danger of loosing any small parts (e.g. nuts). The grey jack serves as an easy and distinguishable normalling identification.

£53.95 £73.00 (inc. VAT) Add to basket

Rack Panel With Lacing Bar, Punched for Neutrik D-Series Chassis Connectors – 1U – 12 Cutouts

  • 1U Rack Panels Punched For 12 x Neutrik D-Series Connectors (XLR, Speakon, RJ45, etc)
  • D-Series Connectors With Locking Release Tab Can Only Be Front Mounted
  • Panels Are Designed For Neutrik “MDLX” Chassis Mount Connectors. Not Designed To Fit Old Style “MDL1” Connectors
  • Will suit NL2MP Or NL4MP Speakon Connectors, But Only When Front Mounted
  • Lacing Bar For Cable Support And Cable Management
  • ID Strip For Easy Connector Identification
£28.99 (inc. VAT) Add to basket

Rack Panel With Lacing Bar, Punched for Neutrik D-Series Chassis Connectors – 1U – 16 Cutouts

  • 1U Rack Panels Punched For 16 x Neutrik D-Series Connectors (XLR, Speakon, RJ45, etc)
  • D-Series Connectors With Locking Release Tab Can Only Be Front Mounted
  • Panels Are Designed For Neutrik “MDLX” Chassis Mount Connectors. Not Designed To Fit Old Style “MDL1” Connectors
  • Will suit NL2MP Or NL4MP Speakon Connectors, But Only When Front Mounted
  • Lacing Bar For Cable Support And Cable Management
  • ID Strip For Easy Connector Identification
£28.99 (inc. VAT) Add to basket

Rack Panel With Lacing Bar, Punched for Neutrik D-Series Chassis Connectors – 1U – 8 Cutouts

  • 1U Rack Panels Punched For 8 x Neutrik D-Series Connectors (XLR, Speakon, RJ45, etc)
  • D-Series Connectors With Locking Release Tab Can Only Be Front Mounted
  • Panels Are Designed For Neutrik “MDLX” Chassis Mount Connectors. Not Designed To Fit Old Style “MDL1” Connectors
  • Will suit NL2MP Or NL4MP Speakon Connectors, But Only When Front Mounted
  • Lacing Bar For Cable Support And Cable Management
  • ID Strip For Easy Connector Identification
£28.99 (inc. VAT) Add to basket

Rack Panels Punched for Neutrik D-Series – 1U – 12 Cutouts

  • 1U Rack Panel Punched For 12 x Neutrik D-Series Connectors (XLR, Speakon, RJ45, etc)
  • Black Powder Coated
  • Material: 1.2mm / 18 Gauge Steel
£8.95 (inc. VAT) Add to basket

Rack Panels Punched for Neutrik D-Series – 1U – 16 Cutouts

  • 1U Rack Panel Punched For 16 x Neutrik D-Series Connectors (XLR, Speakon, RJ45, etc)
  • Black Powder Coated
  • Material: 1.2mm / 18 Gauge Steel
£8.95 (inc. VAT) Add to basket

Rack Panels Punched for Neutrik D-Series – 1U – 4 Cutouts

  • 1U Rack Panel Punched For 4 x Neutrik D-Series Connectors (XLR, Speakon, RJ45, etc)
  • Black Powder Coated
  • Material: 1.2mm / 18 Gauge Steel
£8.95 (inc. VAT) Add to basket

Rack Panels Punched for Neutrik D-Series – 1U – 6 Cutouts

  • 1U Rack Panel Punched For 6 x Neutrik D-Series Connectors (XLR, Speakon, RJ45, etc)
  • Black Powder Coated
  • Material: 1.2mm / 18 Gauge Steel
£8.95 (inc. VAT) Add to basket

Rack Panels Punched for Neutrik D-Series – 1U – 8 Cutouts

  • 1U Rack Panel Punched For 8 x Neutrik D-Series Connectors (XLR, Speakon, RJ45, etc)
  • Black Powder Coated
  • Material: 1.2mm / 18 Gauge Steel
£8.95 (inc. VAT) Add to basket

Showing all 16 results