No products in the basket.
12 Way/Channel Breakout Box With Multipin. Stage Box. 12 x Neutrik Female XLR. VDM 37 Circular Multipin
- Custom Lynx Tourgrade Loaded And Wired 12 Way Breakout Box
- Powder Coated Black Steel Box
- 12 x Neutrik Female XLR
- 1 x VDM 37 Pin Male Circular Multipin In The Side (Can Be Left or Right Side)
- Multipin Connector Comes With Locking Protective Cover
- Box Will Come With 4 x Rubber Feet Screwed To The Base
- Perfect For Tour/Theatre/OB – Anywhere Where Quick Setup And Breakdown Is Essential
- Wired to Industry Standard Pinouts – Custom Wiring Available Please Get In Touch
- Box Dimensions: 32cm x 12cm x 8.5cm
£184.04 (inc. VAT) Add to basket
16 Way/Channel Breakout Box With Multipin. Stage Box. 16 x Neutrik Female XLR. VDM 54 Circular Multipin
- Custom Lynx Tourgrade Loaded And Wired 16 Way Breakout Box
- Powder Coated Black Steel Box
- 16 x Neutrik Female XLR
- 1 x VDM 54 Pin Male Circular Multipin In The Side (Can Be Left or Right Side)
- Multipin Connector Comes With Locking Protective Cover
- Box Will Come With 4 x Rubber Feet Screwed To The Base
- Perfect For Tour/Theatre/OB – Anywhere Where Quick Setup And Breakdown Is Essential
- Wired to Industry Standard Pinouts – Custom Wiring Available Please Get In Touch
- Box Dimensions: 32cm x 12cm x 8.5cm
£241.74 (inc. VAT) Add to basket
Custom Lynx 12 Way Loaded Stage Box – Neutrik – 10 x Female XLR, 2 x Male XLR
- Custom Lynx 12 Way Stage / Wall Boxes
- Loaded with Genuine Neutrik Connectors – 10 x Female XLR / 2 x Male XLR
- Side Gland Panel Can Be Removed And A VEAM Multi Pin (37 Pin) Loaded In
- Left, Right or Rear Cable Entry Available
- Includes Rubber Feet, Gland, Screws And Blanking Plug
£114.05 (inc. VAT) Add to basket
Custom Lynx 12 Way Unloaded Box
Custom Lynx Empty 12 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.
These boxes consist of three parts, a rear back box, front plate and side plate which can be removed so a multi-pin can be connected. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors which can be rear mounted. The back box has three cable entry points, one on the right and left side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.
Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.
Approximate Dimensions
Maximum Cable OD: 18mm
Box Dimensions: 32cm x 12cm x 8.5cm
Size for multi-pin entry:
For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.
£29.35 (inc. VAT) Add to basket
Custom Lynx 16 Channel Stage/Wall Box to 2 x DB25/DSUB Male. 16 Way. Neutrik XLR.
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- 16 Channel Box To 2 x DB25/DSUB Male
- Box Can Be Free Standing Or Wall Mounted
- Analogue Use – Standard Tascam Wiring
- Any Length Available – Black Cable Only
- Custom Braided Fly End Lengths Available
- Neutrik XLR’s/Jacks And Die Cast DSUB Shells
- Length Is From Gland On Box To DB25/DSUB Connector’s – Fly End Lengths Included
- Clearly Numbered/Labelled On Both Ends
- See Below For More Specification
Custom Lynx 16 Way Loaded Stage Box – Neutrik – 12 x Female XLR, 4 x Locking Jack Socket
- Custom Lynx 16 Way Stage / Wall Boxes
- Loaded with Genuine Neutrik Connectors – 12 x Female XLR / 4 x Locking Jack (1/4″)
- Side Gland Panel Can Be Removed And A VEAM Multi Pin (54 Pin) Loaded In
- Left, Right or Rear Cable Entry Available
- Includes Rubber Feet, Gland, Screws And Blanking Plug.
£128.07 (inc. VAT) Add to basket
Custom Lynx 16 Way Loaded Stage Box – Neutrik – 16 x Locking Stereo Jack Sockets (6.35mm – 1/4″)
- Custom Lynx 16 Way Stage / Wall Boxes
- Loaded with Genuine Neutrik Connectors – 16 x Locking Jack Sockets (6.35mm – 1/4″)
- Jacks Can Be Wired Stereo Or Mono
- Side Gland Panel Can Be Removed And A VEAM Multi Pin (54 Pin) Loaded In
- Left, Right or Rear Cable Entry Available
- Includes Rubber Feet, Gland, Screws And Blanking Plug.
£138.20 (inc. VAT) Add to basket
Custom Lynx 16 Way Unloaded Box
Custom Lynx Empty 16 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.
These boxes consist of three parts, a rear back box, front plate and side plate which can be removed so a multi-pin can be connected. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors which can be rear mounted. The back box has three cable entry points, one on the right and left side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.
Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.
Approximate Dimensions
Maximum Cable OD: 18mm
Box Dimensions: 32cm x 12cm x 8.5cm
Size for multi-pin entry:
For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.
£30.85 (inc. VAT) Add to basket
Custom Lynx 2 Way Unloaded Box
These boxes are made from 18 gauge steel, powder coated in black and numbered in white. It comprises of 2 parts, the base and lid. The base is fitted either with feet or to the wall. The cable can then enter through the side, bottom or rear.
Dimensions (Approximately):
L: 14cm
W: 7cm
H: 3.5mm
The boxes come with 4 rubber feet and screws- 2 blanking plugs for the un-used holes and a cable gland. The maximum cable to fit in the gland is 9mm O.D
The 2 connector holes are standard “D” cut outs suitable for standard or Neutrik quality connectors.
£9.50 (inc. VAT) Add to basket
Custom Lynx 24 Channel Stage/Wall Box to 3 x DB25/DSUB Male. 24 Way. Neutrik XLR.
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- 24 Channel Box To 3 x DB25/DSUB Male
- Box Can Be Free Standing Or Wall Mounted
- Analogue Use – Standard Tascam Wiring
- Any Length Available – Black Cable Only
- Custom Braided Fly End Lengths Available
- Neutrik XLR’s & Die Cast DSUB Shells
- Length Is From Gland On Box To DB25/DSUB Connector’s – Fly End Lengths Included
- Clearly Numbered/Labelled On Both Ends
- See Below For More Specification
Custom Lynx 32 Way Loaded Stage Box – Neutrik – 24 x Female XLR Socket & 8 x Male XLR Socket
- Custom Lynx 32 Way Stage / Wall Box
- Loaded with Genuine Neutrik Connectors – 24 x NC3FD-L-1 & 8 x NC3MD-L-1
- Maximum Cable OD: 25mm
- Left, Right or Rear Cable Entry Available
- Box Dimensions: 28cm x 18cm x 6cm
- Includes Rubber Feet, Gland, Screws And Blanking Plug.
£172.97 (inc. VAT) Add to basket
Custom Lynx 8 Way Loaded Stage Box – Neutrik – 6 x Female XLR, 2 x Locking Jack Socket
- Custom Lynx 8 Way Stage / Wall Boxes
- Loaded with Genuine Neutrik Connectors – 6 x Female XLR / 2 x Locking Jack (1/4″)
- Side Gland Panel Can Be Removed And A VEAM Multi Pin (25 Pin) Loaded In
- Left, Right or Rear Cable Entry Available
- Includes Rubber Feet, Gland, Screws And Blanking Plug.
£89.77 (inc. VAT) Add to basket
Custom Lynx 8 Way Loaded Stage Box – Neutrik – 6 x Female XLR, 2 x Male XLR
- Custom Lynx 8 Way Stage / Wall Boxes
- Loaded with Genuine Neutrik Connectors – 6 x Female XLR / 2 x Male XLR
- Side Gland Panel Can Be Removed And A VEAM Multi Pin (25 Pin) Loaded In
- Left, Right or Rear Cable Entry Available
- Includes Rubber Feet, Gland, Screws And Blanking Plug.
£86.99 (inc. VAT) Add to basket
Custom Lynx 8 Way Loaded Stage Box – Neutrik – 8 x Combi 6.32mm (1/4″) Jack/XLR Sockets (NCJ6FI-S)
- Custom Lynx 8 Way Stage / Wall Boxes
- Loaded with Genuine Neutrik Connectors – 8 x Combi 6.32mm (1/4″) Jack/XLR Sockets
- Side Gland Panel Can Be Removed And A VEAM Multi Pin (25 Pin) Loaded In
- Left, Right or Rear Cable Entry Available
- Includes Rubber Feet, Gland, Screws And Blanking Plug.
£73.58 (inc. VAT) Add to basket
Custom Lynx 8 Way Unloaded Box
Custom Lynx Empty 8 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.
These boxes consist of three parts, a rear back box, front plate and side plate which can be removed so a multi-pin can be connected. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors which can be rear mounted. The back box has three cable entry points, one on the right and left side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.
Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.
Approximate Dimensions
Maximum Cable OD: 18mm
Box Dimensions: 32cm x 12cm x 8.5cm
Size for multi-pin entry:
For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.
£27.95 (inc. VAT) Add to basket
Custom Lynx DB25 To Stage/Wall Box. DSUB To Neutrik Multicore, 8 x Female XLR Chassis Sockets
- DB25/DSUB to 8 x Stage/Wall Box (Loaded With 8 x Female XLR Chassis Sockets)
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik Connectors and Diecast DB25 Shell
- Analogue Use – Standard Tascam Wiring
- Steel Box Can Be Free Standing Or Wall Mounted (Free Standing As Standard)
- Box Is Clearly Numbered 1 To 8
- Any Length Available
- Connectors On The Box Can Be XLR / JACK / RCA / MIDI / 3.5mm JACK – Get In Touch If Required
Custom Lynx DB25 To Stage/Wall Box. DSUB To Neutrik Multicore, 8 x TRS Jack Socket – 6.35mm (1/4″)
- DB25/DSUB to 8 x Stage/Wall Box (Loaded With 8 x 6.35mm Locking TRS Jack Sockets)
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik Connectors and Diecast DB25 Shell
- Analogue Use – Standard Tascam Wiring
- Steel Box Can Be Free Standing Or Wall Mounted (Free Standing As Standard)
- Box Is Clearly Numbered 1 To 8
- Any Length Available
- Connectors On The Box Can Be XLR / JACK / RCA / MIDI / 3.5mm JACK – Get In Touch If Required
Custom Lynx Neutrik 12 Channel Wall/Stage Multicore Box to Box System
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Boxes Can Be Free Standing or Wall Mounted (Key Hole Slots In The Rear). With Different Cable Entry Options on the Boxes
- Perfect for Studios
- Boxes Can be Hard Wired, or Just One Box Wired on and the Cable Prepared (So it Can be Pulled Through an Existing Wall and Terminated “On Site”)
- We Can Also Offer the Following Connectors; 5 Pin MIDI, RCA Phono and 3.5mm Jack plugs. If Required Please Enter This in the “Custom” Field Boxes.
- Genuine Neutrik Connectors
- Any Cable Length Available
Custom Lynx Neutrik 12 Way Multicore Stage/Wall Box System
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Perfect For Recording Studios Or Live Stage
- Custom Connector Configurations Available
- Genuine Neutrik Connectors
- Box Can Be Wall Mounted Or Free Standing
- Cable Entry On The Box Can Be Left, Right Or Straight Out The Back – To Go Through A Wall
- Clearly Numbered On Both Box And Fly Connectors
- Custom Braided Fly End Lengths Available
- Length Is From Box To Connector – Fly End Lengths Included
- See Below For More Specification
Custom Lynx Neutrik 16 Channel Wall/Stage Multicore Box to Box System
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Boxes Can Be Free Standing or Wall Mounted (Key Hole Slots In The Rear). With Different Cable Entry Options on the Boxes
- Perfect for Studios
- Boxes Can be Hard Wired, or Just One Box Wired on and the Cable Prepared (So it Can be Pulled Through an Existing Wall and Terminated “On Site”)
- We Can Also Offer the Following Connectors; 5 Pin MIDI, RCA Phono and 3.5mm Jack plugs. If Required Please Enter This in the “Custom” Field Boxes.
- Genuine Neutrik Connectors
- Any Cable Length Available