No products in the basket.
Custom Lynx 3.5mm Stereo Mini Jack to 2×4.4mm (TT) Bantam Stereo Jack Cable
- Stereo Y Splitter
- 3.5mm Stereo Jack to 2 x 4.4mm Bantam TT Jacks
- Custom Lynx Tourgrade Figure 8 Audio Cable – Split As Far As Needed
- NEW & IMPROVED Silver Plated Cable – See Full Spec below.
- Genuine Neutrik Connectors (Rean Neutrik 3.5mm TRS Jack) – Gold Contacts
- 2 x 4.4mm Bantam TT Jacks – NOT 6.35mm (1/4″)
Custom Lynx 4.4mm (TT) Bantam Stereo Jack to 2×4.4mm (TT) Bantam Stereo Jack Cable
- Stereo Y Splitter
- 1 x 4.4mm Bantam TT Jack to 2 x 4.4mm Bantam TT Jacks (Left & Right)
- Van Damme Reduced OD Console Cable (2 Pieces) – Split All The Way To The Single Bantam Plug
- Genuine Neutrik Connectors – Gold Contacts
- 4.4mm Bantam TT Jacks – NOT 6.35mm (1/4″)
Custom Lynx 4.4mm (TT) Bantam Stereo Jack to 2×4.4mm (TT) Bantam Stereo Jack Cable
- Balanced Y Splitter – Duplicates Same Signal To Both Jacks (Twin End)
- 1 x 4.4mm Bantam TT Jack to 2 x 4.4mm Bantam TT Jacks
- Van Damme Reduced OD Console Cable (2 Pieces) – Split All The Way To The Single Bantam Plug
- Genuine Neutrik Connectors – Gold Contacts
- 4.4mm Bantam TT Jacks – NOT 6.35mm (1/4″)
Custom Lynx 4.4mm (TT) Bantam Stereo Jack to 3 Pin Female XLR Cable
- Custom Lynx Professional Balanced Patch Cable – Silver Plated Conductors
- Genuine Neutrik Connectors – Gold Contacts
- 4.4mm TT Bantam TRS Jack & Female XLR Connectors
- 10 Colours + All Lengths Available
Custom Lynx 4.4mm (TT) Bantam Stereo Jack to 3 Pin Female XLR Cable
- Custom Lynx Professional Balanced Patch Cable – Silver Plated Conductors
- Genuine Neutrik Connectors
- 4.4mm TT Bantam TRS Jack & Female XLR Connectors
- 10 Colours + All Lengths Available
Custom Lynx 4.4mm (TT) Bantam Stereo Jack to 3 Pin Male XLR Cable
- Custom Lynx Professional Balanced Patch Cable – Silver Plated Conductors
- Genuine Neutrik Connectors – Gold Contacts
- 4.4mm TT Bantam TRS Jack & Male XLR Connectors
- 10 Colours + All Lengths Available
Custom Lynx 4.4mm (TT) Bantam Stereo Jack to 6.35mm (1/4″) Stereo Jack Cable
- Custom Lynx Professional Balanced Patch Cable – Silver Plated Conductors
- Genuine Neutrik Connectors – Gold Contacts
- 4.4mm TT Bantam TRS Jack & 6.35mm (1/4″) TRS Jack Connectors
- 10 Colours + All Lengths Available
Custom Lynx 4.4mm (TT) Bantam Stereo Jack to 6.35mm (1/4″) Stereo Jack Cable
- Custom Lynx Professional Balanced Patch Cable – Silver Plated Conductors
- Genuine Neutrik Connectors
- 4.4mm TT Bantam TRS Jack & 6.35mm (1/4″) TRS Jack Connectors
- 10 Colours + All Lengths Available
Custom Lynx 6.35mm (1/4″) Stereo Jack to 2×4.4mm (TT) Bantam Stereo Jack Cable
- Stereo Y Splitter
- 6.35mm (1/4″) Stereo Jack to 2 x 4.4mm Bantam TT Jacks
- Custom Lynx Tourgrade Figure 8 Audio Cable – Split As Far As Needed
- NEW & IMPROVED Silver Plated Cable – See Full Spec below.
- Genuine Neutrik Connectors – Gold Contacts
Custom Lynx Angled IEC to Female powerCON TRUE1 Cable – 3×1.0mm² Core
- Titanex HO7RN-F – 3 x 1mm sq
- Kaiser ANGLED C14 IEC Male to Neutrik PowerCON True1 Female (NAC3FX-W-TOP) – Professional Quality
- Insulated Ferrules Used On All Connections
- All Lengths Available
- Free Velcro Hook + Loop With Cables Ordered Over 2m
- Tough Hard Wearing Rubber Cable
- All Cables Throughly Tested Before Dispatch
- Click here for Full Titanex 3x1mm² Cable Specification
Custom Lynx Angled IEC to powerCON IN Cable – 3×1.0mm² Core
- Titanex HO7RN-F – 3 x 1mm sq
- Kaiser ANGLED C14 IEC Male to Neutrik PowerCON IN (NAC3FCA) – Professional Quality
- Insulated Ferrules Used On All Connections
- All Lengths Available
- Free Velcro Hook + Loop With Cables Ordered Over 2m
- Tough Hard Wearing Rubber Cable
- All Cables Throughly Tested Before Dispatch
- Click here for Full Titanex 3x1mm² Cable Specification
Custom Lynx CAT6A etherCON to RJ45 Cable
- NEW Custom Lynx Flexible Tourgrade CAT6A Cable (S/FTP – Braided Screen + Foil Twisted Pairs) – Full Spec Below
- Neutrik EtherCON To Shielded RJ45 Plug – Grounded Both Ends
- Genuine Neutrik NE8MX-1
- Suitable for 10G Performance
- Choice Of Coloured Boots/Rings (Both Ends) + Label Options
- Optional Neutrik Protective Cover (Just EtherCON End)
- Free Velcro Strap With Every Cable Ordered Over 2m
Custom Lynx CAT6A etherCON to RJ45 Cable
- NEW Custom Lynx Flexible Tourgrade CAT6A Cable (S/FTP – Braided Screen + Foil Twisted Pairs) – Full Spec Below
- Neutrik CAT6A EtherCON To Shielded RJ45 Plug – Grounded Both Ends
- Genuine Neutrik NE8MX6
- EtherCON IP65 Protected When mated with NE8FDX-P6-W or NE8FDX-Y6-W
- Suitable for 10G Performance
- Choice Of Coloured Boots/Rings (Both Ends) + Label Options
- Optional Neutrik Protective Cover (EtherCON End)
- Free Velcro Strap With Every Cable Ordered Over 2m
Custom Lynx CAT6A etherCON to RJ45 Cable
- NEW Custom Lynx Flexible Tourgrade CAT6A Cable (S/FTP – Braided Screen + Foil Twisted Pairs) – Full Spec Below
- Neutrik CAT6A EtherCON To Shielded RJ45 Plug – Grounded Both Ends
- Genuine Neutrik NE8MX6-B
- EtherCON IP65 Protected When mated with NE8FDX-P6-W or NE8FDX-Y6-W
- Suitable for 10G Performance
- Choice Of Coloured Boots/Rings (Both Ends) + Label Options
- Optional Neutrik Protective Cover (EtherCON End)
- Free Velcro Strap With Every Cable Ordered Over 2m
Custom Lynx IEC to Male powerCON TRUE1 Cable – 3×1.0mm² Core
- Titanex HO7RN-F – 3 x 1mm sq
- Kaiser C13 IEC Female to Neutrik PowerCON True1 Male (NAC3MX-W-TOP) – Professional Quality
- Insulated Ferrules Used On All Connections
- All Lengths Available
- Free Velcro Hook + Loop With Cables Ordered Over 2m
- Tough Hard Wearing Rubber Cable
- All Cables Throughly Tested Before Dispatch
- Click here for Full Titanex 3x1mm² Cable Specification
Custom Lynx IEC to Male powerCON TRUE1 Cable – 3×1.0mm² Core
- Titanex HO7RN-F – 3 x 1mm sq
- IEC Lock to Neutrik PowerCON True1 Male (NAC3MX-W-TOP) – Professional Quality
- Insulated Ferrules Used On All Connections
- Tough Hard Wearing Rubber Cable
- All Cables Throughly Tested Before Dispatch
Custom Lynx IEC to Male powerCON TRUE1 Cable – 3×1.0mm² Core
- Titanex HO7RN-F – 3 x 1mm sq
- IEC Lock to Neutrik PowerCON True1 Male (NAC3MX-W-TOP) – Professional Quality
- Insulated Ferrules Used On All Connections
- Tough Hard Wearing Rubber Cable
- All Cables Throughly Tested Before Dispatch
Custom Lynx IEC to Male powerCON TRUE1 Cable – 3×1.0mm² Core
- Titanex HO7RN-F – 3 x 1mm sq
- IEC Lock to Neutrik PowerCON True1 Male (NAC3MX-W-TOP) – Professional Quality
- Insulated Ferrules Used On All Connections
- Tough Hard Wearing Rubber Cable
- All Cables Throughly Tested Before Dispatch