recording

1U Custom Rack Panel – Loaded With 16 x Neutrik Female XLR – Wired To 2 x D-SUB/DB25

  • Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
  • 1U Rack Panel – 19″- Loaded With 16 x Genuine Neutrik Female XLR Sockets
  • 2 x 25 Pin D-SUB/DB25 Male (Die Cast Shell) Hard Wired To The XLR’s
  • D-SUB/DB25 Shells Will Be Labelled “CH1 to 8” “CH9 to 16”
  • Analogue Audio Cable – D-SUB Wired Tascam Standard
  • Any Length Available
  • Steel Black Panel

1U Custom Rack Panel – Loaded With 16 x Neutrik HD BNC Feedthrough Connectors

  • 1U Rack Panel – 19″
  • Pre Loaded With 16 x HD BNC Connectors
  • Neutrik Feedthrough Connectors – Grounded
  • Steel Black Panel
£160.76 (inc. VAT) Add to basket

1U Custom Rack Panel – Loaded With 8 x Neutrik Speakon Sockets (4 Pole)

  • 1U Rack Panel – 19″
  • Loaded With 8 x Genuine Neutrik Speakon Sockets (NL4MPXX)
  • For Passive Speaker Use
  • Solder Connectors
  • Steel Black Panel
£48.91 (inc. VAT) Add to basket

2U Custom Rack Panel – Loaded With 24 x Neutrik Female XLR – Wired To 3 x D-SUB/DB25

  • Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
  • 2U Rack Panel – 19″- Loaded With 24 x Genuine Neutrik Female XLR Sockets
  • 3 x 25 Pin D-SUB/DB25 Male (Die Cast Shell) Hard Wired To The XLR’s
  • D-SUB/DB25 Shells Will Be Labelled “CH1 to 8” “CH9 to 16” “CH17 to 24”
  • Analogue Audio Cable – D-SUB Wired Tascam Standard
  • Any Length Available
  • Steel Black Panel

2U Custom Rack Panel – Loaded With 32 x Neutrik Female XLR – Wired To 4 x D-SUB/DB25

  • Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
  • 2U Rack Panel – 19″- Loaded With 32 x Genuine Neutrik Female XLR Sockets
  • 4 x 25 Pin D-SUB/DB25 Male (Die Cast Shell) Hard Wired To The XLR’s
  • D-SUB/DB25 Shells Will Be Labelled “CH1 to 8” “CH9 to 16” “CH17 to 24” “CH25 to 32”
  • Analogue Audio Cable – D-SUB Wired Tascam Standard
  • Any Length Available
  • Steel Black Panel

2U Custom Rack Panel – Loaded With 32 x Neutrik HD BNC Feedthrough Connectors

  • 2U Rack Panel – 19″
  • Pre Loaded With 32 x HD BNC Connectors
  • Neutrik Feedthrough Connectors – Grounded
  • Steel Black Panel
£315.22 (inc. VAT) Add to basket

Custom Lynx 16 Way Loaded Stage Box – Neutrik – 16 x Locking Stereo Jack Sockets (6.35mm – 1/4″)

  • Custom Lynx 16 Way Stage / Wall Boxes
  • Loaded with Genuine Neutrik Connectors – 16 x Locking Jack Sockets (6.35mm – 1/4″)
  • Jacks Can Be Wired Stereo Or Mono
  • Side Gland Panel Can Be Removed And A VEAM Multi Pin (54 Pin) Loaded In
  • Left, Right or Rear Cable Entry Available
  • Includes Rubber Feet, Gland, Screws And Blanking Plug.
£138.20 (inc. VAT) Add to basket

Custom Lynx 2 Way Unloaded Box

  • Custom Lynx Unloaded 2 Way Stage/Wall Box
  • Constructed Using 18 Gauge Steel, Powder Coated Black
  • Cut-Outs Are D-Type Neutrik – Ideally Suited Are Front Mount Connectors
  • Box Can Be Wall Mounted With Cable Entry Right, Out The Back Or Straight Down The Wall
  • Supplied With Cable Gland, Feet, Blanking Plugs And Connector Screws
  • Maximum Cable OD: 9mm
  • Box Dimensions: 14cm x 7cm x 3.5cm
£9.60 (inc. VAT) Add to basket

Custom Lynx 20 Way Unloaded Stage/Wall Box

  • Custom Lynx Unloaded 20 Way Stage/Wall Box
  • Constructed Using 18 Gauge Steel, Powder Coated Black
  • Cut-Outs Are D-Type Neutrik – Ideally Suited Are Rear Mount “M3” Connectors
  • Box Can Be Wall Mounted (Key Hole Slots) With Cable Entry Left, Right Or Straight Out The Back
  • Multipin Connector Can Be Mounted In The Side Of The Box
  • Supplied With Cable Gland, Feet And Blanking Plug
  • Maximum Cable OD: 25mm
  • Box Dimensions: 32cm x 18cm x 9cm
£37.92 (inc. VAT) Add to basket

Custom Lynx 28 Way Unloaded Stage/Wall Box

  • Custom Lynx Unloaded 28 Way Stage/Wall Box
  • Constructed Using 18 Gauge Steel, Powder Coated Black
  • Cut-Outs Are D-Type Neutrik – Ideally Suited Are Rear Mount “M3” Connectors
  • Box Can Be Wall Mounted (Key Hole Slots) With Cable Entry Left, Right Or Straight Out The Back
  • Multipin Connector Can Be Mounted In The Side Of The Box
  • Supplied With Cable Gland, Feet And Blanking Plug
  • Maximum Cable OD: 25mm
  • Box Dimensions: 32cm x 18cm x 9cm
£39.94 (inc. VAT) Add to basket

Custom Lynx 3.5mm Stereo Mini Jack to 2×4.4mm (TT) Bantam Stereo Jack Cable

  • Stereo Y Splitter
  • 3.5mm Stereo Jack to 2 x 4.4mm Bantam TT Jacks
  • Custom Lynx Tourgrade Figure 8 Audio Cable – Split As Far As Needed
  • NEW & IMPROVED Silver Plated Cable – See Full Spec below.
  • Genuine Neutrik Connectors (Rean Neutrik 3.5mm TRS Jack) – Gold Contacts
  • 2 x 4.4mm Bantam TT Jacks – NOT 6.35mm (1/4″)

Custom Lynx 32 Way Unloaded Stage/Wall Box

  • Custom Lynx Unloaded 32 Way Stage/Wall Box
  • Constructed Using 18 Gauge Steel, Powder Coated Black
  • Cut-Outs Are D-Type Neutrik – Ideally Suited Are Rear Mount “M3” Connectors
  • Box Can Be Wall Mounted (Key Hole Slots) With Cable Entry Left, Right Or Straight Out The Back
  • Multipin Connector Can Be Mounted In The Side Of The Box
  • Supplied With Cable Gland, Feet And Blanking Plug
  • Maximum Cable OD: 25mm
  • Box Dimensions: 32cm x 18cm x 9cm
£41.95 (inc. VAT) Add to basket

Custom Lynx 38 Pin EDAC to EDAC Loom – 12 Channel Cable

  • Please Specify At The Checkout – Sex Of Connectors, And Cable Entry (Straight or Angled)
  • Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
  • Genuine EDAC Connectors
  • Length Is From Connector To Connector
  • Any Length Available – Black Cable Only
  • See Below For More Specification

Custom Lynx 38 Pin Female EDAC to 8 × Female 3 Pin XLR Loom – Straight Entry

  • Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
  • Genuine EDAC & Neutrik Connectors
  • Clearly Numbered 1 To 8 Under Clear Rings (On The Body Of The XLR’s)
  • Custom Braided Fly End Lengths Available
  • Length Is From Connector To Connector – Fly End Lengths Included
  • Any Length Available – Black Cable Only
  • See Below For More Specification

Custom Lynx 38 Pin Male EDAC to 12 × 6.35mm (1/4″) TRS Jack Loom – Straight Entry

  • Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
  • Genuine EDAC & Neutrik Connectors
  • Clearly Numbered 1 To 12 Under Clear Heat Shrink (Behind The Connectors)
  • Custom Braided Fly End Lengths Available
  • Length Is From Connector To Connector – Fly End Lengths Included
  • Any Length Available – Black Cable Only
  • See Below For More Specification

Custom Lynx 38 Pin Male EDAC to 12 × Female 3 Pin XLR Loom – Straight Entry

  • Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
  • Genuine EDAC & Neutrik Connectors
  • Clearly Numbered 1 To 12 Under Clear Rings (On The Body Of The XLR’s)
  • Custom Braided Fly End Lengths Available
  • Length Is From Connector To Connector – Fly End Lengths Included
  • Any Length Available – Black Cable Only
  • See Below For More Specification

Custom Lynx 38 Pin Male EDAC to 12 × Male 3 Pin XLR Loom – Side Entry

  • Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
  • Genuine EDAC & Neutrik Connectors
  • Clearly Numbered 1 To 12 Under Clear Rings (On The Body Of The XLR’s)
  • Custom Braided Fly End Lengths Available
  • Length Is From Connector To Connector – Fly End Lengths Included
  • Any Length Available – Black Cable Only
  • See Below For More Specification

Custom Lynx 38 Pin Male EDAC to 8 × Female 3 Pin XLR Loom – Side Entry

  • Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
  • Genuine EDAC & Neutrik Connectors
  • Clearly Numbered 1 To 8 Under Clear Rings (On The Body Of The XLR’s)
  • Custom Braided Fly End Lengths Available
  • Length Is From Connector To Connector – Fly End Lengths Included
  • Any Length Available – Black Cable Only
  • See Below For More Specification

Custom Lynx 38 Pin Male EDAC to 8 × Male 3 Pin XLR Loom – Side Entry

  • Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
  • Genuine EDAC & Neutrik Connectors
  • Clearly Numbered 1 To 8 Under Clear Rings (On The Body Of The XLR’s)
  • Custom Braided Fly End Lengths Available
  • Length Is From Connector To Connector – Fly End Lengths Included
  • Any Length Available – Black Cable Only
  • See Below For More Specification

Custom Lynx 38 Pin Male EDAC to 8 × Male 3 Pin XLR Loom – Straight Entry

  • Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
  • Genuine EDAC & Neutrik Connectors
  • Clearly Numbered 1 To 8 Under Clear Rings (On The Body Of The XLR’s)
  • Custom Braided Fly End Lengths Available
  • Length Is From Connector To Connector – Fly End Lengths Included
  • Any Length Available – Black Cable Only
  • See Below For More Specification

Showing 1–20 of 89 results