Custom Lynx Neutrik 12 Way Male XLR to 6.35mm (1/4″) TRS Jack Loom – Balanced

> > SKU: 12xNC3MXX/PJP12WNEW/12xNP3X
  • Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
  • Genuine Neutrik Connectors – NP3X & NC3MXX
  • Any Length’s Available – Black Cable Only
  • Custom Braided Fly End Lengths Available
  • Length Is From Connector To Connector – Fly End Lengths Included
  • Jack Plugs Clearly Numbered 1 to 12 – Under Clear Heatshrink
  • Male XLR Plugs Clearly Numbered 1 to 12 – On The XLR Body Under Clear Rings
  • See Below For More Specification

Clear
  • Please enter a number from 0.05 to 100.
    Information about cable lengths can be found in our FAQ
  • £ 0.00

Description

Custom Lynx Professional 6.35mm (1/4″) TRS Jack to Male XLR looms. Each one “made to order” here by ourselves. The cable itself is our NEW improved multicore cable – made with only the best materials, it is the perfect blend of rugged, yet flexible – full specification below.

The connectors are the industry standard – Neutrik. One reason for using these – they dont fail!

The channel numbers are put under clear rings on the body of the XLR’s themselves, then under clear heat-shrink behind the jacks – this eliminates the markers wearing off over time. All connectors also have hot glue inside the connectors before being assembled to ensure no movement.

The inner channels are individually braided (black PET). This strengthens the loom, making a more professional product.

These cables are hand built in the UK, rigorously tested before dispatch and carry a 12 Month Guarantee

PLEASE NOTE:

The length of cable is measured from connector to connector, which includes the breakout/tails.

For 50cm length looms we will supply 150mm (15cm) tails on both ends.

 

Connectors specification:
NP3X – Neutrik 6.35mm (1/4″) stereo jack
NC3MXX – Neutrik 3 pin male XLR

Cable specification:
PJP12W Spec Sheet – Studio Quality Pre-Jacketed Multicore Cable

 

Please note:
The length of cable is measured from connector to connector, which includes the breakout/tails. For 50cm length looms we will supply 150mm (15cm) tails on both ends as standard. We can also offer different breakout/tail lengths from the drop down option. Please specify if you require different breakout/tails length at point of order.

Reviews (0)

0.0
0
0
0
0
0

Be the first to review “Custom Lynx Neutrik 12 Way Male XLR to 6.35mm (1/4″) TRS Jack Loom – Balanced”

There are no reviews yet.