Custom Lynx Neutrik 2 x 25 Pin DSUB/DB25 to 16 x 6.35mm (1/4″) TRS Jack Loom

> > SKU: 2xDB25/PJP16WNEW/16xNP3X
  • Single Loom, 16 x TRS Jack One End Going To 2 x DB25 Male At The Other End
  • 16 Way Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
  • Genuine Neutrik Stereo Jacks (NP3X) & Diecast DB25 Shells
  • Black Braided Fly/Tail/Breakouts
  • Length Is From Connector To Connector – Fly/Tail/Breakout Lengths Included
  • DSUBs Numbered On Shells (1-8 / 9-16)
  • Jacks Have Channel Numbers Behind, Each Under Clear Heatshrink
  • “Tascam” Wired – Analogue Use
  • Any Length’s Available – Black Cable Only
  • See Below For More Specification

  • Please enter a number from 0.05 to 100.
    Information about cable lengths can be found in our FAQ
  • £ 0.00


Custom Lynx 16 Channel/Way 2 x DB25/DSUB to 16 x 6.35mm (1/4″) TRS Jack. All DB25’s are wired to standard “Tascam” pinouts. This loom is for analogue use, not digital.

Using the best components on the market, the looms come with:

  • Genuine Neutrik 6.35mm (1/4″) TRS Jack (NP3X) Connectors and Diecast DB25 Shells
  • Custom Lynx Black Pre Jacketed Multicore Cable – New & Improved (Full Spec Below)
  • Both Ends Clearly Labelled
  • Black Plyosil Braid Used To Protect, Making For A More Rugged And Professional Loom

With the channel numbers being under clear heat shrink (jack end) it eliminates the marker wearing off over time. The DSUB’s are labelled on the shells – see picture 2

Connectors specification:
NP3X – Neutrik 3 pin female XLR

Cable specification:

PJP16W Spec Sheet– studio quality pre-jacketed multicore cable


The length of cable is measured from connector to connector, which includes the breakout/tails.
If you require different tail lengths at either end of the loom, please leave a NOTE at the checkout

Reviews (0)


Be the first to review “Custom Lynx Neutrik 2 x 25 Pin DSUB/DB25 to 16 x 6.35mm (1/4″) TRS Jack Loom”

There are no reviews yet.