Custom Lynx SONIQ 6.35mm (1/4″) Mono Jack Cable

Description

These cables are for use with guitars, keyboards or in the studio as short patch leads. Each cable is carefully assembled by our trained team here in Leicestershire. Every lead is tested before it leaves us, and they all carry a Lifetime Guarantee against manufacturing defects.

The connectors are genuine Neutrik, they are the industry standard, and for good reason….they just dont fail!

SONIQ – the cable itself:

After the positive feedback received about our new microphone cable (Testudo) and unbalanced patch cable, the next in line for a major overhaul was our instrument/guitar cable – “SONIQ” is the new name for this cable.

We knew we wanted to keep the distinctive colour range running through all our cables going forward (luminous orange proving particularly popular). The outer jacket material is also something we wanted to duplicate, it feels and wraps beautifully and falls without kinks.

The inside of the cable is where we could make massive improvements from our old instrument cable. Using pure oxygen free copper for both the conductor and shielding. Increasing the amount and quality of copper used dramatically, creating a cable that offers the highest signal consistency and superb un-wanted noise rejection.

We believe like the microphone cable, that SONIQ can become an industry standard cable – comparing other competitors professional instrument cable, it is a BIG improvement.

The full specification sheet can be found below.

Connectors specification:
NP2X-B – Neutrik 6.35mm (1/4″) mono jack plug, black shell & gold contacts

Cable specification:
SONIQ – Professional Instrument OFC Cable

Please Note:
All cables ordered under 1m will have a visible cable length to match. For example, a 25cm cable will have 25cm of visible cable plus the length of the connectors.