Custom Lynx Neutrik 2 x 25 Pin DSUB/DB25 to 8 x TRS Jack Loom – Insert Loom

> > SKU: 8xNP3X/PJP16WNEW/2xDB25(INSERT LOOM)
  • Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
  • Insert DB25/DSUB Loom
  • Analogue Use
  • Any Length Available – Black Cable Only
  • Custom Braided Fly End Lengths Available
  • Neutrik TRS Jacks And Die Cast DSUB Shells
  • Length Is From Connector To Connector – Fly End Lengths Included
  • Clearly Numbered/Labelled On Both Ends
  • See Below For More Specification

Clear
  • Please enter a number from 0.05 to 100.
    Information about cable lengths can be found in our FAQ
  • £ 0.00

Description

Custom Lynx professional Twin D-SUB to 8 x TRS (1/4″) Stereo Jack Looms. The cable is Analogue, with the DSUBS wired to standard Tascam pinouts – Except all Cold/Ring pins on both DSUBS are wired to ground on the TRS Jacks. This is an insert loom – taking the Hot/Tip from the TRS to one DSUB and the Cold/Ring from the TRS to the other DSUB.

Using the best components on the market:

Genuine Neutrik Connectors
2 x Die Cast DB25 Connector
Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)

These cables are hand built in the UK. Tested before dispatch and each hold a 12 Month Guarantee

Please Note: Length of cable is from D-SUB connector to the TRS Stereo Jacks (breakout/tails are included in this length).

Cable Specification:

PJP16W Spec Sheet

Connector Specification:

2 x 25 pin DB25 (DSUB) Die Cast Connector

Neutrik – NP3X

Reviews (0)

0.0
0
0
0
0
0

Be the first to review “Custom Lynx Neutrik 2 x 25 Pin DSUB/DB25 to 8 x TRS Jack Loom – Insert Loom”

There are no reviews yet.