Custom Lynx SONIQ 6.35mm (1/4″) Angled to Straight Mono Jack Cable – silentPLUG

  • Custom Lynx SONIQ – OFC Professional Instrument Cable – Redesigned and Improved
  • For Guitar Use – Red Silent Jack Must Plug Into The Guitar
  • Genuine Neutrik Connectors – Gold Contacts
  • Neutrik Silent Jack Automatically Mutes The Cable To Avoid Pops/Squeals When Changing Over Guitars
  • Lifetime Guarantee Against Manufacturing Defects
  • Coloured Boot & Custom Label Option Available
  • Free Hook + Loop Wrap With Each Cable Ordered Over 2m

 
 
Clear

Description

Professional Guitar Cables. The Silent plug automatically mutes (shorts) the instrument cable to avoid pops and squeals when changing over guitars under load. Important: Silent (red) jack MUST be plugged into your guitar.

Each cable is carefully assembled by our trained team here in Leicestershire. Every lead is tested before it leaves us, and they all carry a Lifetime Guarantee against manufacturing defects.

The connectors are genuine Neutrik, they are the industry standard, and for good reason….they just dont fail!

SONIQ – the cable itself:

After the positive feedback received about our new microphone cable (Testudo) and unbalanced patch cable, the next in line for a major overhaul was our instrument/guitar cable – “SONIQ” is the new name for this cable.

We knew we wanted to keep the distinctive colour range running through all our cables going forward (luminous orange proving particularly popular). The outer jacket material is also something we wanted to duplicate, it feels and wraps beautifully and falls without kinks.

The inside of the cable is where we could make massive improvements from our old instrument cable. Using pure oxygen free copper for both the conductor and shielding. Increasing the amount and quality of copper used dramatically, creating a cable that offers the highest signal consistency and superb un-wanted noise rejection.

We believe like the microphone cable, that SONIQ can become an industry standard cable – comparing other competitors professional instrument cable, it is a BIG improvement.

The full specification sheet can be found below.

Connectors specification:
NP2RX-B – Neutrik 6.35mm (1/4″) right angled mono jack, black shell & gold contacts
NP2X-AU-SILENT – Neutrik 6.35mm (1/4″) mono silent jack plug, red shell & gold contacts

Cable specification:
SONIQ – Professional Instrument OFC Cable

 

Please Note:
All cables ordered under 1m will have a visible cable length to match. For example, a 25cm cable will have 25cm of visible cable plus the length of the connectors.

Reviews (0)

0.0
0
0
0
0
0

Be the first to review “Custom Lynx SONIQ 6.35mm (1/4″) Angled to Straight Mono Jack Cable – silentPLUG”

There are no reviews yet.