
Custom Lynx 4.4mm (TT) Bantam TRS Jack to 2 × 4.4mm (TT) Bantam TRS Jack Lead – Black & Red Shells/Gold Contacts
- Stereo Y Splitter
- 1 x 4.4mm Bantam TT Jack to 2 x 4.4mm Bantam TT Jacks (Left & Right)
- Van Damme Reduced OD Console Cable (2 Pieces) – Split All The Way To The Single Bantam Plug
- Genuine Neutrik Connectors – Gold Contacts
- 4.4mm Bantam TT Jacks – NOT 6.35mm (1/4″)

Custom Lynx 4.4mm (TT) Bantam TRS Jack to 2 × 4.4mm (TT) Bantam TRS Jack Lead – Black Shell/Gold Contacts
- Balanced Y Splitter – Duplicates Same Signal To Both Jacks (Twin End)
- 1 x 4.4mm Bantam TT Jack to 2 x 4.4mm Bantam TT Jacks
- Van Damme Reduced OD Console Cable (2 Pieces) – Split All The Way To The Single Bantam Plug
- Genuine Neutrik Connectors – Gold Contacts
- 4.4mm Bantam TT Jacks – NOT 6.35mm (1/4″)

Custom Lynx Neutrik 12 Way 4.4mm Bantam TT Jack Loom – Balanced/Stereo
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik NP3TT-P-B Connectors
- Clearly Numbered 1 to 12 Under Clear Heatshrink
- Custom Braided Fly End Lengths Available
- Length Is From Connector To Connector – Fly End Lengths Included
- Any Length’s Available – Black Cable Only
- See Below For More Specification

Custom Lynx Neutrik 12 Way 4.4mm Bantam TT Jack to 6.35mm (1/4″) MONO Jack Loom
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik Connectors – NP2X (MONO) / NP3TT-P-B
- Clearly Numbered 1 to 12 Under Clear Heatshrink
- Custom Braided Fly End Lengths Available
- Length Is From Connector To Connector – Fly End Lengths Included
- Any Length’s Available – Black Cable Only
- See Below For More Specification

Custom Lynx Neutrik 12 Way 4.4mm Bantam TT Jack to Female XLR Loom – Balanced/Stereo
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik Connectors – NC3FXX / NP3TT-P-B
- Clearly Numbered 1 to 12 Under Clear Rings / Heatshrink
- Custom Braided Fly End Lengths Available
- Length Is From Connector To Connector – Fly End Lengths Included
- Any Length’s Available – Black Cable Only
- See Below For More Specification

Custom Lynx Neutrik 12 Way 4.4mm Bantam TT Jack to Male XLR Loom – Balanced/Stereo
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik Connectors – NC3MXX / NP3TT-P-B
- Clearly Numbered 1 to 12 Under Clear Rings / Heatshrink
- Custom Braided Fly End Lengths Available
- Length Is From Connector To Connector – Fly End Lengths Included
- Any Length’s Available – Black Cable Only
- See Below For More Specification

Custom Lynx Neutrik 16 Way 4.4mm Bantam TT Jack Loom – Balanced/Stereo
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik NP3TT-P-B Connectors
- Clearly Numbered 1 to 16 Under Clear Heatshrink
- Custom Braided Fly End Lengths Available
- Length Is From Connector To Connector – Fly End Lengths Included
- Any Length’s Available – Black Cable Only
- See Below For More Specification

Custom Lynx Neutrik 16 Way 4.4mm Bantam TT Jack to 6.35mm (1/4″) TRS Jack Loom – Balanced/Stereo
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik Connectors – NP3X / NP3TT-P-B
- Clearly Numbered 1 to 16 Under Clear Heatshrink
- Custom Braided Fly End Lengths Available
- Length Is From Connector To Connector – Fly End Lengths Included
- Any Length’s Available – Black Cable Only
- See Below For More Specification

Custom Lynx Neutrik 16 Way 4.4mm Bantam TT Jack to 6.35mm (1/4″) MONO Jack Loom
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik Connectors – NP2X (MONO) / NP3TT-P-B
- Clearly Numbered 1 to 16 Under Clear Heatshrink
- Custom Braided Fly End Lengths Available
- Length Is From Connector To Connector – Fly End Lengths Included
- Any Length’s Available – Black Cable Only
- See Below For More Specification

Custom Lynx Neutrik 16 Way 4.4mm Bantam TT Jack to Female XLR Loom – Balanced/Stereo
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik Connectors – NC3FXX / NP3TT-P-B
- Clearly Numbered 1 to 16 Under Clear Rings / Heatshrink
- Custom Braided Fly End Lengths Available
- Length Is From Connector To Connector – Fly End Lengths Included
- Any Length’s Available – Black Cable Only
- See Below For More Specification

Custom Lynx Neutrik 16 Way 4.4mm Bantam TT Jack to Male XLR Loom – Balanced/Stereo
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik Connectors – NC3MXX / NP3TT-P-B
- Clearly Numbered 1 to 16 Under Clear Rings / Heatshrink
- Custom Braided Fly End Lengths Available
- Length Is From Connector To Connector – Fly End Lengths Included
- Any Length’s Available – Black Cable Only
- See Below For More Specification

Custom Lynx Neutrik 2 x 4.4mm (TT) Bantam TRS Jack to 6.35mm (1/4″) TRS Stereo Jack Patch Cable – Silver Plated Figure 8 Cable – Black & Gold Contacts
- Stereo Y Splitter
- 6.35mm (1/4″) Stereo Jack to 2 x 4.4mm Bantam TT Jacks
- Custom Lynx Tourgrade Figure 8 Audio Cable – Split As Far As Needed
- NEW & IMPROVED Silver Plated Cable – See Full Spec below.
- Genuine Neutrik Connectors – Gold Contacts

Custom Lynx Neutrik 20 Way 4.4mm Bantam TT Jack Loom – Balanced/Stereo
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik NP3TT-P-B Connectors
- Clearly Numbered 1 to 20 Under Clear Heatshrink
- Custom Braided Fly End Lengths Available
- Length Is From Connector To Connector – Fly End Lengths Included
- Any Length’s Available – Black Cable Only
- See Below For More Specification

Custom Lynx Neutrik 20 Way 4.4mm Bantam TT Jack to 6.35mm (1/4″) TRS Jack Loom – Balanced/Stereo
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik Connectors – NP3X / NP3TT-P-B
- Clearly Numbered 1 to 20 Under Clear Heatshrink
- Custom Braided Fly End Lengths Available
- Length Is From Connector To Connector – Fly End Lengths Included
- Any Length’s Available – Black Cable Only
- See Below For More Specification

Custom Lynx Neutrik 20 Way 4.4mm Bantam TT Jack to 6.35mm (1/4″) MONO Jack Loom
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik Connectors – NP2X (MONO) / NP3TT-P-B
- Clearly Numbered 1 to 20 Under Clear Heatshrink
- Custom Braided Fly End Lengths Available
- Length Is From Connector To Connector – Fly End Lengths Included
- Any Length’s Available – Black Cable Only
- See Below For More Specification

Custom Lynx Neutrik 20 Way 4.4mm Bantam TT Jack to Female XLR Loom – Balanced/Stereo
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik Connectors – NC3FXX / NP3TT-P-B
- Clearly Numbered 1 to 20 Under Clear Rings / Heatshrink
- Custom Braided Fly End Lengths Available
- Length Is From Connector To Connector – Fly End Lengths Included
- Any Length’s Available – Black Cable Only
- See Below For More Specification

Custom Lynx Neutrik 20 Way 4.4mm Bantam TT Jack to Male XLR Loom – Balanced/Stereo
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik Connectors – NC3MXX / NP3TT-P-B
- Clearly Numbered 1 to 20 Under Clear Rings / Heatshrink
- Custom Braided Fly End Lengths Available
- Length Is From Connector To Connector – Fly End Lengths Included
- Any Length’s Available – Black Cable Only
- See Below For More Specification

Custom Lynx Neutrik 24 Way 4.4mm Bantam TT Jack Loom – Balanced/Stereo
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik NP3TT-P-B Connectors
- Clearly Numbered 1 to 24 Under Clear Heatshrink
- Custom Braided Fly End Lengths Available
- Length Is From Connector To Connector – Fly End Lengths Included
- Any Length’s Available – Black Cable Only
- See Below For More Specification

Custom Lynx Neutrik 24 Way 4.4mm Bantam TT Jack to 6.35mm (1/4″) TRS Jack Loom – Balanced/Stereo
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik Connectors – NP3X / NP3TT-P-B
- Clearly Numbered 1 to 24 Under Clear Heatshrink
- Custom Braided Fly End Lengths Available
- Length Is From Connector To Connector – Fly End Lengths Included
- Any Length’s Available – Black Cable Only
- See Below For More Specification

Custom Lynx Neutrik 24 Way 4.4mm Bantam TT Jack to 6.35mm (1/4″) MONO Jack Loom
- Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
- Genuine Neutrik Connectors – NP2X (MONO) / NP3TT-P-B
- Clearly Numbered 1 to 24 Under Clear Heatshrink
- Custom Braided Fly End Lengths Available
- Length Is From Connector To Connector – Fly End Lengths Included
- Any Length’s Available – Black Cable Only
- See Below For More Specification