Looms / Multicores

Custom Lynx 12 Way Unloaded Box

0 out of 5
(0)

Custom Lynx Empty 12 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.

These boxes consist of three parts, a rear back box, front plate and side plate which can be removed so a multi-pin can be connected. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors which can be rear mounted. The back box has three cable entry points, one on the right and left side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.

Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.

Approximate Dimensions

Maximum Cable OD: 18mm

Box Dimensions: 32cm x 12cm x 8.5cm

Size for multi-pin entry:

For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

£29.35 (inc. VAT) Add to basket

Custom Lynx 16 Channel Stage/Wall Box to 2 x DB25/DSUB Male. 16 Way. Neutrik XLR.

0 out of 5
(0)
  • 16 Channel Box To 2 x DB25/DSUB Male
  • Box Can Be Free Standing Or Wall Mounted
  • Analogue Use – Standard Tascam Wiring
  • Any Length Available – Black Cable Only
  • Custom Braided Fly End Lengths Available
  • Neutrik XLR’s And Die Cast DSUB Shells
  • Length Is From Gland On Box To DB25/DSUB Connector’s – Fly End Lengths Included
  • Clearly Numbered/Labelled On Both Ends
  • See Below For More Specification

Custom Lynx 16 Way Unloaded Box

0 out of 5
(0)

Custom Lynx Empty 16 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.

These boxes consist of three parts, a rear back box, front plate and side plate which can be removed so a multi-pin can be connected. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors which can be rear mounted. The back box has three cable entry points, one on the right and left side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.

Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.

Approximate Dimensions

Maximum Cable OD: 18mm

Box Dimensions: 32cm x 12cm x 8.5cm

Size for multi-pin entry:

For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

£30.85 (inc. VAT) Add to basket

Custom Lynx 2 Way Unloaded Box

0 out of 5
(0)

These boxes are made from 18 gauge steel, powder coated in black and numbered in white. It comprises of 2 parts, the base and lid. The base is fitted either with feet or to the wall. The cable can then enter through the side, bottom or rear.

Dimensions (Approximately):

L: 14cm

W: 7cm

H: 3.5mm

The boxes come with 4 rubber feet and screws- 2 blanking plugs for the un-used holes and a cable gland. The maximum cable to fit in the gland is 9mm O.D

The 2 connector holes are standard “D” cut outs suitable for standard or Neutrik quality connectors.

£9.50 (inc. VAT) Add to basket

Custom Lynx 20 Way Unloaded Box

0 out of 5
(0)

Custom Lynx Empty 20 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.

These boxes consist of two parts, a rear back box and front plate. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors. The back box has two cable entry points, one on the side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.

Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.

Approximate Dimensions

Maximum Cable OD: 25mm

Box Dimensions: 28cm x 18cm x 6cm

For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

£37.50 (inc. VAT) Add to basket

Custom Lynx 24 Channel Stage/Wall Box to 3 x DB25/DSUB Male. 24 Way. Neutrik XLR.

0 out of 5
(0)
  • 24 Channel Box To 3 x DB25/DSUB Male
  • Box Can Be Free Standing Or Wall Mounted
  • Analogue Use – Standard Tascam Wiring
  • Any Length Available – Black Cable Only
  • Custom Braided Fly End Lengths Available
  • Neutrik XLR’s And Die Cast DSUB Shells
  • Length Is From Gland On Box To DB25/DSUB Connector’s – Fly End Lengths Included
  • Clearly Numbered/Labelled On Both Ends
  • See Below For More Specification

Custom Lynx 24 Way Unloaded Box

0 out of 5
(0)

Custom Lynx Empty 24 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.

These boxes consist of two parts, a rear back box and front plate. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors. The back box has two cable entry points, one on the side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.

Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.

Approximate Dimensions

Maximum Cable OD: 25mm

Box Dimensions: 28cm x 18cm x 6cm

For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

£39.50 (inc. VAT) Add to basket

Custom Lynx 28 Way Unloaded Box

0 out of 5
(0)

Custom Lynx Empty 28 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.

These boxes consist of two parts, a rear back box and front plate. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors. The back box has two cable entry points, one on the side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.

Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.

Approximate Dimensions

Maximum Cable OD: 25mm

Box Dimensions: 28cm x 18cm x 6cm

For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

£41.50 (inc. VAT) Add to basket

Custom Lynx 32 Way Unloaded Box

0 out of 5
(0)

Custom Lynx Empty 32 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.

These boxes consist of two parts, a rear back box and front plate. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors. The back box has two cable entry points, one on the side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.

Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.

Approximate Dimensions

Maximum Cable OD: 25mm

Box Dimensions: 28cm x 18cm x 6cm

For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

£43.50 (inc. VAT) Add to basket

Custom Lynx 4 Way Unloaded Box

0 out of 5
(0)

These 4 way boxes are made from 18 gauge steel, powder coated in black and numbered in white. It comprises of 2 parts, the base and lid. The base is fitted either with feet or to the wall. The cable can then enter through the side, bottom or rear.

Dimensions (Approximately):

L: 14cm

W: 7cm

H: 3.5mm

The boxes come with 4 rubber feet and screws- 2 blanking plugs for the un-used holes and a cable gland. The maximum cable to fit in the gland is 9mm O.D

The 4 connector holes are standard “D” cut outs suitable for standard or Neutrik quality connectors.

£11.50 (inc. VAT) Add to basket

Custom Lynx 8 Way Unloaded Box

0 out of 5
(0)

Custom Lynx Empty 8 Way Stage/Wall Boxes constructed using 18 gauge steel which has been powder coated in black.

These boxes consist of three parts, a rear back box, front plate and side plate which can be removed so a multi-pin can be connected. Each plate has numbered cut outs to accept D Type Neutrik or other standard D-Type chassis connectors which can be rear mounted. The back box has three cable entry points, one on the right and left side and one on the rear, and pre-drilled holes to enable either wall mounting or the attachment of rubber feet.

Each box is supplied with 4 rubber feet and screws, a set of screws for each connector, a cable entry gland and a single cable blanking plug to cover the unused cable entry hole.

Approximate Dimensions

Maximum Cable OD: 18mm

Box Dimensions: 32cm x 12cm x 8.5cm

Size for multi-pin entry:

For an additional fee we can also supply these boxes fully loaded with connectors of your choice, or alternatively as fully assembled Stage/Wall Box systems. Please contact us if you wish to discuss this option.

£27.95 (inc. VAT) Add to basket

Custom Lynx DB25 To Stage/Wall Box. DSUB To Neutrik Multicore, 8 x Female XLR Chassis Sockets

0 out of 5
(0)
  • DB25/DSUB to 8 x Stage/Wall Box (Loaded With 8 x Female XLR Chassis Sockets)
  • Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
  • Genuine Neutrik Connectors and Diecast DB25 Shell
  • Analogue Use – Standard Tascam Wiring
  • Steel Box Can Be Free Standing Or Wall Mounted (Free Standing As Standard)
  • Box Is Clearly Numbered 1 To 8
  • Any Length Available
  • Connectors On The Box Can Be XLR / JACK / RCA / MIDI / 3.5mm JACK – Get In Touch If Required

Custom Lynx DB25 To Stage/Wall Box. DSUB To Neutrik Multicore, 8 x TRS Jack Socket – 6.35mm (1/4″)

0 out of 5
(0)
  • DB25/DSUB to 8 x Stage/Wall Box (Loaded With 8 x 6.35mm Locking TRS Jack Sockets)
  • Custom Lynx Studio Quality Cable – Hugely Improved Specification (See Below) and Feel (Completely Smooth)
  • Genuine Neutrik Connectors and Diecast DB25 Shell
  • Analogue Use – Standard Tascam Wiring
  • Steel Box Can Be Free Standing Or Wall Mounted (Free Standing As Standard)
  • Box Is Clearly Numbered 1 To 8
  • Any Length Available
  • Connectors On The Box Can Be XLR / JACK / RCA / MIDI / 3.5mm JACK – Get In Touch If Required

Custom Lynx DSUB “Mult” Connector. DB25 Mults 4 x 2 – Die Cast Shell

0 out of 5
(0)
  • Custom Lynx Studio MULT Connectors – 4 x 2
  • Create Multiple Points
  • Bridged 1 to 4 and 5 to 8
  • Die Cast Shells
£25.00 £30.00 (inc. VAT) Add to basket

Custom Lynx DSUB “Mult” Connector. DB25 Mults 4 x 2 – Die Cast Shell – Black

0 out of 5
(0)
  • Custom Lynx Studio MULT Connectors – 4 x 2
  • Create Multiple Points
  • Bridged 1 to 4 and 5 to 8
  • Black Die Cast Shells
£30.00 £35.00 (inc. VAT) Add to basket

Custom Lynx High Quality 25 PIN DSUB/DB25 to 25 PIN DSUB/DB25 Loom

0 out of 5
(0)
  • 25 PIN DB25/DSUB Male to 25 PIN DB25/DSUB Male
  • Custom Lynx High Quality Multicore Cable
  • Diecast DB25 Shell’s
  • Analogue Use – Standard Tascam Wiring
  • Set Length’s Available
£31.95£47.95 (inc. VAT) Select options

Custom Lynx High Quality 25 PIN DSUB/DB25 to 8 x Female XLR Plugs Loom

0 out of 5
(0)
  • 25 PIN DB25/DSUB Male to 8 x Female XLR Plugs
  • Custom Lynx High Quality Multicore Cable
  • Diecast DB25 Shell
  • Analogue Use – Standard Tascam Wiring
  • Set Length’s Available – Length is Connector to Connector (Breakouts Included)
  • 300mm Fly End/Breakouts as Standard – Any Other Length Needed Please Leave a Note at the Checkout
  • Heatshrink Channel Markers
£29.95£45.95 (inc. VAT) Select options

Custom Lynx High Quality 25 PIN DSUB/DB25 to 8 x Male XLR Plugs Loom

0 out of 5
(0)
  • 25 PIN DB25/DSUB Male to 8 x Male XLR Plugs
  • Custom Lynx High Quality Multicore Cable
  • Diecast DB25 Shell
  • Analogue Use – Standard Tascam Wiring
  • Set Length’s Available – Length is Connector to Connector (Breakouts Included)
  • 300mm Fly End/Breakouts as Standard – Any Other Length Needed Please Leave a Note at the Checkout
  • Heatshrink Channel Markers
£29.95£45.95 (inc. VAT) Select options

Custom Lynx High Quality 25 PIN DSUB/DB25 to 8 x TRS Jack Plugs Loom

0 out of 5
(0)
  • 25 PIN DB25/DSUB Male to 8 x Stereo (TRS) Jack Plugs – 6.35mm
  • Custom Lynx High Quality Multicore Cable
  • Diecast DB25 Shell
  • Analogue Use – Standard Tascam Wiring
  • Set Length’s Available – Length is Connector to Connector (Breakouts Included)
  • 300mm Fly End/Breakouts as Standard – Any Other Length Needed Please Leave a Note at the Checkout
  • Heatshrink Channel Markers
£29.95£45.95 (inc. VAT) Select options

Custom Lynx Neutrik 12 Channel Wall/Stage Multicore Box to Box System

0 out of 5
(0)
  • Boxes can be free standing or wall mounted. With different cable entry options on the boxes
  • Perfect for Studios
  • Both boxes can be hard wired, or just one box wired on and the cable prepared (so it can be pulled through an existing wall and terminated “on site”)
  • We can also offer the following connectors; 5 Pin MIDI, RCA Phono and 3.5mm Jack plugs. If required please enter this in the “custom” field boxes.
  • Genuine Neutrik Connectors
  • Any cable length available

Showing 1–20 of 117 results