Custom Lynx 10-Way Insert Loom – 10×TRS Jack To 20×XLR (10×Male/10×Female)
From £304.33
- Custom Lynx Studio Quality Cable – Hugely Improved Specification and Feel
- Neutrik Connectors – NP3X, NC3FXX & NC3MXX
- Female XLR wired to the Tip of the TRS jack, Male wired to the ring
- Custom Braided Fly End Lengths Available
- Length Is From Connector To Connector – Fly End Lengths Included
- Clearly Numbered 1 to 10 Under Clear Heatshrink And Clear Rings
Share:
Custom Lynx 10×stereo jack to 20×mono XLR (10×male and 10×female) insert loom. Neutrik 6.35mm (1/4″) TRS jack plugs (NP3X) on one end and Neutrik 3-pin XLR female and male plugs (NC3FXX & NC3MXX) on the other end.
Each one “made to order” here by ourselves. The cable itself is our NEW improved multicore cable – made with only the best materials, it is the perfect blend of rugged, yet flexible – full specification below. The connectors are the industry standard – Neutrik. One reason for using these – they don’t fail!
The channel numbers being under clear rings/heat shrink it eliminates the marker wearing off over time. All connectors also have hot glue inside the connectors before being assembled to ensure no movement. Both XLRs are wired in unbalanced mono wiring, with the female XLR wired to the TIP of the stereo jack, and the male XLR wired to the RING.
Please note:
The length of cable is measured from connector to connector, which includes the breakout/tails. If you require different tail lengths at either end of the loom, please leave a note at the checkout.
Connectors specification:
NP3X-D – Neutrik 6.35mm (1/4″) stereo jack connector
NC3FXX-D – Neutrik 3-pin female XLR connector
NC3MXX-D – Neutrik 3-pin male XLR connector
Cable specification:
PJP24W – Custom Lynx studio quality multicore cable
| End 1 | |
|---|---|
| End 2 | |
| Channels/Ways | |
| Fly End Length | 300mm, 500mm, 700mm, 1000mm |
| Cable Grade | |
| Cable Type |
