AudioJoG Pro 8 Cable Tester

AudioJoG Pro 8 – Audio cable tester with 3,4 & 5 pin XLR, 1/4″ & 3.5mm Stereo Jack, Stereo Bantam, 4 & 8 pole Speakon, 5 pin mini DIN, 8 pin DIN, BNC, 4mm banana, USB A & B, ETHERCON RJ45 and RCA Phono sockets featuring SINGLE & DOUBLE ended testing, memory and intermittent fault detection.

£156.00 (inc. VAT)


Audio/Lighting/Network cable tester with SINGLE & DOUBLE ended testing.
Now with INTERMITTENT fault detection.

AudioJog Pro 8 Cat 5e Network Cable Testers

This is also a LAN cable tester and an Ethernet cable tester

Connectors for the AudioJog Pro 8 – Cat 5e Network Cable Testers

  •  3, 4 & 5 Pole XLR Male & Female
  •  6.35mm Jack, stereo or mono
  • Single or Twin 4.4mm Bantam, stereo or mono
  • 3.5mm Jack, stereo or mono
  • 2, 4 & 8 Pole Speakon
  • DIN 3 & 5 (180°) & 8 Pole
  • MINI DIN 4 Pole (S Video)
  • RCA Phono
  • BNC
  • RJ45, Ethercon
  • USB A & B
  • 4mm Red & Black “banana”

Features of the AudioJog Pro 8 Cat 5e cable tester:
There are 2 rows of 9 LED’s corresponding to each of the possible connector pins of the AudioJog Pro 8 – Cat 5e Network Cable Testers and one for the screen (or ground) connection. As each pin is activated, the LED’s indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED’s also show the possibility of high resistance or leakage connections. 2 LED’s indicate a good digital network connection, either Straight through, or Crossed over.

Memory option

  •  There are 6 LED’s indicating the state of the MEMORY option.
  • If the MEMORY LED is on, then AudioJoG Pro 8 automatically scans all the connections and compares against information held with just one press of the test button.
  • MEMORY works in single and double ended test modes.
  • INTERMITTENT fault detection uses the memory to continuously test the cable until a fault is found.

Test modes for AudioJog Pro 8 Audio/Lighting/Network Cable Testers:

  • Double ended – both ends of the cable under test are plugged into AudioJoG Pro 8.
  • Single ended – one end of the cable under test is plugged into AudioJoG Pro 8 the other into another AudioJoG Pro 8 or any other compatible AudioJog tester.

Specification Double {Single} Ended:

  • Continuity and Short Circuits, less than 255K {75K} ohms
  • Open Circuits (end to end and between connected pins), greater than 255K {75K} ohms.
  • Less than 2 {5} second test time
  • L 203mm W 150mm D 50mm
  • Uses 9v PP3 battery (not supplied)

Reviews (0)


Be the first to review “AudioJoG Pro 8 Cable Tester”

There are no reviews yet.