AudioJoG Pro 8 MOBILE Cable Tester

AudioJoG Pro 8 mobile- Audio cable tester with Powerconn IN & OUT, 3,4 & 5 pin XLR, 1/4″ & 3.5mm Stereo Jack, Stereo Bantam, 4 pole Speakon, 5 pin mini DIN, 8 pin DIN, BNC, 4mm banana, USB A & B, ETHERCON RJ45 and RCA Phono sockets featuring SINGLE & DOUBLE ended testing, memory and intermittent fault detection.

£162.00 (inc. VAT)


Audio/Lighting/Network cable tester with SINGLE & DOUBLE ended testing with memory and intermittent fault detection


  • 3, 4 & 5 Pole XLR Male & Female
  • 6.35mm Jack, stereo or mono
  • 3.5mm Jack, stereo or mono
  • 2.5mm Jack, stereo or mono
  • Powercon IN & OUT
  • 2 or 4 Pole Speakon
  • MINI DIN 4 Pole
  • DIN 3, 5 (180o) & 8 Pole
  • RCA Phono
  • BNC 50/75 Ohm / HD SDI
  • RJ45, Ethercon
  • USB A & B
  • 4mm Red & Black


There are 2 rows of 9 LED’s corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED’s indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED’s also show the possibility of high resistance or leakage connections. 2 LED’s indicate a good digital network connection, either Straight through, or Crossed over.

Memory Option:

There are 6 LED’s indicating the state of the MEMORY option.

If the MEMORY LED is on, then AudioJoG Pro 8 mobile automatically scans all the connections and compares against information held with just one press of the test button.

MEMORY works in single  and double ended test modes..

INTERMITTENT fault detection uses the memory to continuously test the cable until a fault is found.

Test Modes:

Double ended – both ends of the cable under test are plugged into the AudioJoG Pro 8 mobile

Single ended – one end of the cable under test is plugged into AudioJoG Pro 8 mobile the other into another AudioJoG Pro 8 mobile or any other compatible AudioJoG tester

Specification, Double {Single} ended:

Continuity and Short Circuits, less than 255K {75K} ohms

Open Circuits (end to end and between connected pins), greater than 255K {75K} ohms

Less than 2 {5} second test time

Sturdy METAL BOX construction

L 203mm W 150mm D 50mm

Uses 9v PP3 battery (not supplied)

Reviews (0)


Be the first to review “AudioJoG Pro 8 MOBILE Cable Tester”

There are no reviews yet.