AudioJoG Pro 3 Cable Tester

> SKU: AudioJogPro3

AudioJoG Pro 3 – Audio cable tester with 3pin XLR 1/4″ Stereo Jack and RCA Phono sockets featuring SINGLE & DOUBLE ended testing, memory and intermittent fault detection.

£63.60 (inc. VAT)

Description

Audio cable tester with SINGLE & DOUBLE ended testing, memory and intermittent fault detection .

Connectors for the AudioJog Pro 3 Audio Cable Testers

  •  3 Pole XLR Male & Female
  •  6.35mm Jack, stereo or mono
  •  RCA Phono

Features of the AudioJog Pro 3:
There are 2 rows of 4 LED’s corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED’s indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED’s also show the possibility of high resistance or leakage connections.

Memory
There are 4 LED’s indicating the state of the MEMORY option.
If the MEMORY LED is on, then AudioJoG Pro 3 automatically scans all the connections and compares against information held with just one press of the test button. MEMORY works in single and double ended test modes. INTERMITTENT fault detection uses the memory to continuously test the cable until a fault is found.

Test modes for AudioJog Pro 3:
Double ended – both ends of the cable under test are plugged into the AudioJoG Pro 3.

Single ended – ended – one end of the cable under test is plugged into AudioJoG Pro 3 the other into another AudioJoG Pro 3 or any other compatible AudioJoG tester.

Specification, Double {Single} ended:

  • Continuity and Short Circuits, less than 255K {75K} ohms
  • Open Circuits (end to end and between connected pins), greater than 255K {75K} ohms.
  • Less than 2 {5} second test time
  • Sturdy METAL BOX construction
  • L 97mm W 83mm D 50mm
  • Uses 9v PP3 battery (not supplied)

Reviews (0)

0.0
0
0
0
0
0

Be the first to review “AudioJoG Pro 3 Cable Tester”

There are no reviews yet.