Custom Lynx DB25 to 8×XLR (4×Female + 4×Male) IN/OUT Loom – YAMAHA – Black & Gold

Custom Lynx 8 channel DB25/DSUB to XLR loom (4×female & 4×male) where female XLR’s are inputs and male XLR’s are outputs. Made using our digital AES 110ohm cable and Neutrik connectors. For full specification please use the link below.

This loom is for digital use. DB25 is wired to standard YAMAHA pinout.
DB25 is wired as per diagram below.

DB25 Pin 1/14/10 (shared ground) – IN 1-2
DB25 Pin 2/15/10 (shared ground) – IN 3-4
DB25 Pin 3/16/12 – IN 5-6
DB25 Pin 4/17/13 – IN 7-8
DB25 Pin 5/18/22 – OUT 1-2
DB25 Pin 6/19/23 – OUT 3-4
DB25 Pin 7/20/24 – OUT 5-6
DB25 Pin 8/21/25 – OUT 7-8

Using the best components on the market, the looms come with:

• Neutrik & MH connectors
• both ends clearly labelled
• black plyosil braid is used to protect each channel, making a more rugged and professional loom
• free velcro strap with looms over 2m long

With the channel numbers being under clear rings it eliminates the marker wearing off over time. All connectors also have hot glue inside the connectors before being assembled to ensure no movement. Custom printed labels are available at £1.00 (ex. VAT) per connector, so for example custom labels on 8-way loom would cost £16.00 (ex. VAT).

Please note:
The length of cable is measured from connector to connector, which includes the breakout/tails. If you require different tail lengths at either end of the loom, please leave a note at the checkout.

Photo is for illustrative purposes only. This loom is made using black AES multicore, NOT green cable.

Cable specification:
PJP8W/AES – Custom Lynx series digital multicore cable

Connector specification:
NC3MXX-B – Neutrik 3-pin male XLR connector, black shell & gold contacts
NC3FXX-B – Neutrik 3-pin female XLR connector, black shell & gold contacts
DB25 – MH DSUB shell with male insert, black shell & silver contacts