Custom Lynx CAT5E etherCON to RJ45 Cable
From £10.49
- Custom Lynx Flexible CAT5E Cable (F/UTP – Foil Shielded) – Full Spec Below
- Neutrik etherCON Connectors
- Shielded RJ45 Plugs Grounded To The etherCON Shell
- Coloured Boots, Label Options & Protective Covers Available
- Free Velcro Strap With Every Cable Ordered Over 2m
Share:
Custom Lynx CAT5E etherCON cables constructed using our latest Custom Lynx flexible CAT5E F/UTP foil screened cable, Neutrik connectors and shielded and grounded RJ45 plugs – grounded to the etherCON shell on one end. Made to any length you require with options for coloured boots, custom labelling and dust covers available.
Neutrik NE8MX-1 cable connector carrier consists of a shell, chuck and boot. The boot (same as X-series) is suitable for cable diameters from 3.5 – 8mm and is for non pre-assembled cables only. etherCON connector upgrades a conventional RJ45 connector to an extremely robust lockable solution.
This cable is terminated “Straight Through” meaning mapping of connections pin to pin from 1 to 8 (1 to 1, 2 to 2, etc.)
Connectors specification:
NE8MX-1 – Neutrik etherCON connector
RJ45 – Custom Lynx CAT5/CAT5E RJ45 connector
Cable specification:
C5E/FUTP – Custom Lynx flexible CAT5E F/UTP cable
Please note:
All cables ordered under 1m will have a visible cable length to match. For example, a 25cm cable will have 25cm of visible cable plus connectors.
| Cable Type |
|---|
